Ta K/O's are actually, the best tire for your application (imho)
P rating and their load range is significantly less than LT rated radials.
If you had a LT radial and a P radial both rated at 2450 lb the lt radials can actually do a decent percentage over rated, i believe it's 10% standard. That's part of what LT means.
They are pretty much a street tire that does ok around constructions sites and wall mart parking lots. You can beat up on them a bit, and they last forever.
I'm not saying you cant have your cake and eat it but your quest for mpg pretty much stopped when you got a lift.
Your going to experience chunking and elevated sidewall punctures when you even trail lightly with p radials.
I get about 29-30 combined with a IM2. And around 34-36 all highway.
I have km2's in 235/85/16 lr-E they are rated for 80- psi but i get a decent loss of traction on pavement at around 45 psi. I also get massive outer wear at under 35 psi for me front is perfect at 43 psi and rear at 40. At 45 psi the rear would want to slide around a bit. (i consistently drive a decent mountain pass so i have a great basis for comparison)
Don't think of pressure alone as your answer to mpg. Excessive wear is typically what you'll find.
Maby you would be satisfied with a rugged trail (id keep the ko's)
http://www.bfgoodrichtires.com/specs/ru ... /1163.html
or Commercial T/A® Traction
http://www.bfgoodrichtires.com/specs/co ... on/48.html
I dont favor bfg it's just what i'm familiar with, i'm sure Goodyear and others have similar.
The real question is, what do you not like about your ko's? If the answer is mpg, your doing good. They are an excellent tire. (if you don't off-road alot)
if i saw a lifted jeep with less than ko rubber i would wonder wtf the owner was thinking, it's inconsistent with the theme.
Your truck you do what makes you happy, but think about those ko's again.
* re reading your post it almost sounds liek you need to go up in aggressiveness, and not down, you have $$ in a lift, armor, and probably recovery gear, but your using construction site rubber*