JJsKJ wrote:
If you look up at the front crossmember, just above the leading edge of the front skid, you will see the two swaybar mounting bushings mounting the bar to the crossmember. Remove those 4 nuts w/ an 18mm socket and you should be able to pull off the metal covers and then pop off the bushings and lube them up prior to reinstalling. It is a good idea to clean them of any rust or dirt you might find too. You can use the silicon spray but I coat mine w/ a heavy chassis grease.
Thanks JJ, will do that today. Any specific lube you would recommend more than the other or is any chassis grease good enough?
And prospect62, heres that thread.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=12494&highlight=grease+zerks+sway+bar. Use Google to search the forum. Put in your search terms "sway bar bushing grease zerks" then "site:http://www.lostjeeps.com/forum/phpBB3/" all in the search bar and it will only search that forum.
Ryan