Without doing any searches, and i know I've read it before....


What would the benefit be to using a 2003 TJ Rubicon wheel (and the MTR's that come with them). I can buy 5 for about 6-700 Canadian. Will this give the Libby a wider stance at all? I like the wheels that I have (Renegade 2005 Libby), but with the lift, I always wonder if it would be wise to go wider. I don' like the idea of wheel spacers.

Thanks

Basically...should I buy these?

_________________
2005 Liberty Renegade
Old Man Emu HD Coils, OME Struts, OME Shocks
Tow Package with Champion Receiver Shackle
RB1 Navigation
245/75R16 Goodyear Duratrac's (Installed November 24, 2010
Slightly Trimmed Front Bumper and Wheel Well Liner
Pinch Weld Pounded
Custom Rock Rails
Rock Crusher Diff Cover (Not installed)

16X8 5 inches of backspacing so a little wider stance but if you like the wheels you have now why change, that extra little bit will not make that much difference. 6to700 seems to be the going rate anymore or what some think they are worth, how good are the tires?
I have them but only because I like the looks of them! I have had mine for 3 years or so came with MTRs which I sold right away!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

I do like the rims I have now. If it's only a little wider, I'll hold off until I can afford a Cragar Soft 8 with a wider stance and some MT's of some kind or another.

Thanks for the advice. the money will stay in the bank.

_________________
2005 Liberty Renegade
Old Man Emu HD Coils, OME Struts, OME Shocks
Tow Package with Champion Receiver Shackle
RB1 Navigation
245/75R16 Goodyear Duratrac's (Installed November 24, 2010
Slightly Trimmed Front Bumper and Wheel Well Liner
Pinch Weld Pounded
Custom Rock Rails
Rock Crusher Diff Cover (Not installed)

I have them too and like the look a lot, even with the noisy MT/R's I will get something quieter if I ever wear these out.

_________________
Jason
----------