It is currently Fri Mar 29, 2024 4:02 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 25 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: spare tire removal help
PostPosted: Mon Feb 15, 2010 1:50 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Feb 01, 2009 2:29 am
Posts: 5956
Location: Hillsborough, NC / Corolla NC
lowes or home depot whatever you have in the area, has a similar "fastener" area near the nuts/bolts section

if you can't find one of those feathered push in deals, a reuseable plastic pop rivet would probably work but probably wouldn't be nearly as tight as those feathered deals

i'd imagine they'ed have the feathered ones, take one of the bolts with you so you can get an idea of how large the hole is

so to speak

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632


Top
 Profile  
 
 Post subject: Re: spare tire removal help
PostPosted: Mon Feb 15, 2010 2:00 am 
Offline
LOST Addict
User avatar

Joined: Sun Jan 06, 2008 4:43 pm
Posts: 1206
Location: Las Vegas, Nevada
No idea why I didnt think of that. Thanks. Will swing by tomorrow :) :banghead:

_________________
My Rig:
2008 Jeep Wrangler JKU
OME HD lift
35" tires (thus far)
plus a ton of other things. J.E.E.P.


Top
 Profile  
 
 Post subject: Re: spare tire removal help
PostPosted: Wed Feb 17, 2010 12:35 am 
Offline
LOST Addict
User avatar

Joined: Sun Jan 06, 2008 4:43 pm
Posts: 1206
Location: Las Vegas, Nevada
Well I stopped at Home Depot and they didn't have a thing like it. So on my way back to the office I stopped at a Lowes and there it was. Took a little while to find but they had some Chrysler body panel clips and at 80 cents per 2 pack I figured what the heck. I went out to the KJ and yeap they will work. Now I just need to wash and wax then they will go in. :)

Thanks everyone!! :JEEPIN:

_________________
My Rig:
2008 Jeep Wrangler JKU
OME HD lift
35" tires (thus far)
plus a ton of other things. J.E.E.P.


Top
 Profile  
 
 Post subject: Re: spare tire removal help
PostPosted: Wed Feb 17, 2010 2:25 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sun Feb 01, 2009 2:29 am
Posts: 5956
Location: Hillsborough, NC / Corolla NC
glad ya got it sorted out!

_________________
03 Renegade (Black)
177k miles 3.7L gas - 45RFE
Command Trac / 4.10s
Lift: ft. 790+ rr. JBA4+
The last of the TrailReady Front&Rear Bumpers and TR Rock Rails
Jarhead Offroad light covers
31x10.5R15 RedLetter Grabbers on Blackrock Dunes
L.O.S.T #KD098632


Top
 Profile  
 
 Post subject: Re: spare tire removal help
PostPosted: Wed Feb 17, 2010 5:45 am 
Offline
Lifetime Member
Lifetime Member

Joined: Tue May 05, 2009 7:40 pm
Posts: 688
Location: ky
Xodius wrote:
Ok I am digging up an oldie. So I took off my spare and I went to AZ to pick up some caps. They didn't have any and all they had were a few packs of small ones. I did buy 2 packs which looked like they would work...but they didn't, lol. Any other ideas? :D

In the bolt section,aisle 5 usually,on the rotating racks of packaged bolts and plastic rivets or at Lowes in the hardware section,chest of drawers with all kinds of fasteners

Whoops,guess I need to read more :pepper:

_________________
02 Sport,Frankenlifted,JBA arms,31/11.50/15 LTB,Aussie locker,204,000m
Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com