Pic Request: Rear Bumpers

Fulltimer · **Posted:** Wed Feb 03, 2010 8:04 am

I would like to see some pics of home made rear bumpers + ifo. on them.

Terry

yodejt02 · **Posted:** Wed Feb 03, 2010 9:47 pm

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=59&t=48641

heres what I did

rescu2000 · **Posted:** Sun Mar 21, 2010 12:34 pm

Here's some pics of a front and rear. I just added the little angled pieces at the bottom of the rear today. Made it look much better. I still need to smooth in some small holes and repaint it all.

Xodius · **Posted:** Mon Apr 19, 2010 5:33 pm

So far I just removed mine and made the needed mods to the rear for the new one. I have no picts of the new one because I have not fabbed it up yet

. Give me about...4 weeks. I should have more to report by then.

Fulltimer · **Posted:** Mon Apr 19, 2010 7:12 pm

I'll be waiting. There are a lot of front bumper pics but not many of the rear. I appreciate the responses so far.

Terry

tommudd · **Posted:** Mon Apr 19, 2010 9:08 pm

Try going to other sites like I8MUD, Expedition Portal etc, all have a ton of pics of rear bumpers that could be used as a basis for a KJ rear

Fulltimer · **Posted:** Tue Apr 20, 2010 5:23 am

Thanks Tom, I'll check them out.

Terry

Xodius · **Posted:** Tue Apr 20, 2010 3:47 pm

Hey Fultimer you on Facebook? I have a couple of pics there of the rear off and the cuts. Only thing I can say is if you use a plasma cutter for the cuts make sure you have some water

On the passenger side my Father In Law made the cuts and it smoked a little, no biggie but when I got home it still smelled like something was burning or smoldering...there was, LO :pepper:

L. It was some spray foam the got a little too warm either from the Plasma or the Welds we did. *shrug* oh well.

rescu2000 · **Posted:** Thu Apr 22, 2010 7:51 pm

Here are some updated pics of mine with the new tire carrier I added last weekend. I've also added the bosses around the shackle mounts since the last time I posted up pics (I think)...

Fulltimer · **Posted:** Fri Apr 23, 2010 12:29 pm

Xodius wrote:

Hey Fultimer you on Facebook? I have a couple of pics there of the rear off and the cuts. Only thing I can say is if you use a plasma cutter for the cuts make sure you have some water

On the passenger side my Father In Law made the cuts and it smoked a little, no biggie but when I got home it still smelled like something was burning or smoldering...there was, LO :pepper:

L. It was some spray foam the got a little too warm either from the Plasma or the Welds we did. *shrug* oh well.

PM sent.

Terry

Pic Request: Rear Bumpers

Who is online