It is currently Wed Oct 08, 2025 10:58 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: ABS Help, where to start...
PostPosted: Wed Jun 30, 2010 3:43 pm 
Offline
LOST Member

Joined: Sat Feb 23, 2008 4:14 pm
Posts: 334
Location: Central Florida
My CRD sat for three weeks. Upon starting all was well, until we drove about three miles. ABS system went nuts. Now the lights come on and off and the ABS is active every stop (except when it disables itself due to error).

I'm speculating the wheel speed sensor may be crudded up from rust on the rotors due to sitting. Does this sound plausible? I haven't even looked at them yet. Any suggestions are welcome. I looked at the FSM and they don't look too bad to get to.

Any problem with pulling either the 40A ABS pump or the 20A ABS valve fuses to disable the system until I get it figured out?

Chester

_________________
2006 CRD Limited
SEGR Mod
Saikou Michi Condenser -- Deleted
Samco Hose Kit
Fumoto 102
Etecno1 GX3123 Steel 7V Glow Plugs
GDE FT Eco and Hot Tunes
JBA 4.5 UCAs
OME Lift


Top
 Profile  
 
 Post subject: Re: ABS Help, where to start...
PostPosted: Fri Jul 02, 2010 2:04 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Nov 03, 2009 3:34 pm
Posts: 248
Location: Pontiac, Qc. (Canada)
Are you getting trouble codes with it (CEL up)?

_________________
RIP 10/31/2012
Green Metallic 2006 CRD Limited
GDE Hot tune ~ Pre-F37 TCM ~ Transgo shift kit ~ MagnaFlow ~ Homemade Provent ~ OME 2" lift & Airlift ~ Samco ~ Euro TC ~ Lift pump ~ Nylon fan blade & Hayden clutch ~ Etc!


Top
 Profile  
 
 Post subject: Re: ABS Help, where to start...
PostPosted: Fri Jul 02, 2010 6:27 pm 
Offline
LOST Member

Joined: Sat Feb 23, 2008 4:14 pm
Posts: 334
Location: Central Florida
I only got a CEL after I pulled the ABS fuses. The ABS, ESP/BAS, and the Jeep sliding lights would come on intermittently and go off usually within a couple minutes of driving. I took it to my mechanic because my code reader wasn't telling me anything about the ABS system. It ended up being the right rear wheel speed sensor. $65 for the part and labor and it's good to go.

Chester

_________________
2006 CRD Limited
SEGR Mod
Saikou Michi Condenser -- Deleted
Samco Hose Kit
Fumoto 102
Etecno1 GX3123 Steel 7V Glow Plugs
GDE FT Eco and Hot Tunes
JBA 4.5 UCAs
OME Lift


Top
 Profile  
 
 Post subject: Re: ABS Help, where to start...
PostPosted: Sat Jul 10, 2010 2:22 am 
Offline
LOST Junkie

Joined: Mon Feb 06, 2006 12:24 pm
Posts: 902
Pull the codes. You'll probably have a right rear wheel sensor code. Its a 1 minute job to replace the sensor but odds are the sensor is good and you have a bad wire feeding the sensor (mine did and was intermitten for a long time).


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 65 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com