Here are two pictures of a hose I found while doing and oil change. The oil on the hose is from what I spilled removing the oil filter. The other end was not connected. Can anyone tell me where the other end should be attached to and what this hose does?

Thanks.

This shows the end not connected


This shows where the hose originates from on the under the engine, ignore the oil on it.

_________________
It's not a car
It's not an SUV
It's not a truck
It's a JEEP!

I think that is correct. It is definitely a breather though.
The end that is "not connected" is just supposed to sit over a screw near the battery to be held in place.

_________________
-dbk
SOLD2007 6 Speed - Projector Retrofit -Custom LED Tail Lights - Lights on Cowl & 130w 8" ProComps - Full Skids-RockLizard Super Skink Sliders-Front Hitch
Frankenlifted-Al's A-Arms-Goodyear Duractracs 31x10.5R15x7 Cragar D Window 4"bs-Cobra 75WXST - 4' Firestick
4.10s sitting in a box - 3
Sold-1988 Suzuki Samurai
2002 Jeep TJ

That is indeed the front diff breather and it snaps onto the driver side coil over bolt that sticks up under the battery. If you cant get to it or cant find it just zip tie it up nice and high away from moving/hot parts.

_________________
LOST KJ'S
Where are you going???
Current Jeep: 2004 Jeep Liberty
-Atlantic Blue
-Air Ride Rear Suspension ; OME/Rustys Lift ; Powertrax Locker ; Moog Lower Ball-Joints ; 245/70/16 Yokohama Geolander A/T-S's on MOABS ; Flowmaster 50 SUV
Lost #007082
http://www.cardomain.com/id/jeepjeepster

Thanks for the info I did slip onto a bolt. Just curious would it leak oil? Just want to make sure all that oil on it is from me and not a leak.
Thanks

_________________
It's not a car
It's not an SUV
It's not a truck
It's a JEEP!