Dje Ryu wrote:
That's in the manual.
1: press and hold "unlock"
2: while holding "unlock" wait at least 4 seconds but no more than 10 seconds, then press the "Lock" button
3: release both buttons
repeat these steps to return it to the other setting.
Sorry to dredge up this old post, but this is the exact thing that I am trying to accomplish, unsuccessfully.
I have an '04 Liberty Sport, new to me, and would like to program the remote per the instructions in the owners manual. When I follow the above sequence, or any of the other "hold then press" sequences detailed in the manual, (turn off horn chirp on lock, open rear window on 1st press, etc.) none of the programs change. I think either I am, or the procedure is, missing something.
Questions:
When pressing and holding the first button for 4 to 10 seconds (varies depending on what you are trying to change) does the key have to be in the ignition? In any particular position?
When pressing the 2nd button (also varies) do you still need to be holding down the first one? Or should you release the 4-10 second button and then press the 2nd button?
Are you actually programming the remote itself or the module in the Jeep that communicates with the remote? In other words, will each of the remotes need to be programmed or are they global in nature?
Anything else? I don't get why this isn't working. I'm not a dummy and work on far more complex stuff than this every day. I feel like I must be overlooking something...