BugginKJ wrote:
Hey I paid him some money too! What gives? Is he charging us admission now Tom?!?!?!?!

Hehehehe .....

with friends like you guys, who needs .....

any other friends? Hart and Tom are welcome at my house anytime!
I thought we were going to have an engineering session

, next thing I know, Hart has crawled up into the engine compartment, " Hand me that radiator" .. "Ok, if we cut this here and just lop that right out of the way there... put a porta-power in between here and here and just push it apart here .... it'll fit!", Tom is on my right "that right there needs to come out too!" Hart - " hand me a 10mm wrench, no get a ratchet" . So we removed a couple little things, bolted on the top radiator support and hood latch, took measurements, held the new radiator up there, measured the engine to fan pulley again, looked at the engine compartment some more and yes, somewhere in all that looking, measuring, planning, cussing and discussing, fitting and bolting/unbolting Tom cut his hand.

Well, I guess there was a little blood.
Also confirmed the layout for the factory crossmember C-notch modification. I'll bolt it on a layout table tomorrow at work and begin those modifications. With any luck and no machines breaking down in the plant, I should have that done by Friday afternoon.
All in all, actually a very productive afternoon.

Thanks, Tommudd & BugginKJ (I'll have more beer next time!)
(and I made money doing it!)

"WE HAVE A PLAN"

It may be my JEEP but, they sure seem to be having fun with it!

_________________
02 Red KJ Sport,33s,
custom fenders,custom roof rack,custom 5" susp, cradle drop,
V8 swap[url=http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=68&t=64049]04 KJ, 4" Fox coilovers, Bilstein, 33's, RL front bumper
'05 WK Limited, Hers