Hey everyone, I've got about 800mi on the lift, I think I am sitting a little nose-high. I have some rear isos to put in, but was wondering what people use as a reference for leveling?

Should the height from the center of the wheel to the bottom of the fender flare be the same for all 4 (ideally)?
Should the bottom (rocker panel) be level?
Some other line on the Jeep? Just eyeball it?
What has worked well?

Thanks!

_________________
2003 KJ Freedom Edition, Frankenlift II, JBA modified CV axles, 245 70 17 Goodyear MTR Kevlar

eye ball...
but then mine has been highly trained to spot one even 1/16 of an inch lower on one corner.



measuring from center of wheel to flare works best, some measure from rocker panel down etc

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited