Gauge Pods

STINGN · **Posted:** Thu Jan 27, 2011 4:40 pm

Zack A wrote:

Ok..I ordered mine Sunday morning. Figured it would be shipped by now?!?!?!

same, never got tracking number so im just waiting really :juggle:

Zack A · **Posted:** Fri Jan 28, 2011 12:48 pm

Well got an email yesterday from the gauge pod place...Its shipped however no tracking number :evil:

STINGN · **Posted:** Wed Feb 02, 2011 4:42 pm

everything is installed and working

Gauge Pod holder has to be mounted to the original pod we have with the grab bar off OR you can drill through the metal A-Pillar and take some longer screws to hold it one, which is what I did. I will add pictures later.

For the wiring

Volts- Positive (for the Unit and for the light) went to my Radio power.
Oil - Positive (unit and lights) went to the cig power.

For both of the negatives I wired them together (2 volts and 2 oil) and then placed them on a ground near the gas peddle.

I will be adding pictures soon when i get a point and shoot, my DSLR will not focus that close or fit in those spots lol

Zack A · **Posted:** Fri Feb 04, 2011 10:21 pm

Get me pics asap!!! I've just got to find time to get everything installed. I changed and bought a digital Oil Pressure gauge instead of the analog one, just waiting for it to come in. Where did you get the T connector and everything?

STINGN · **Posted:** Fri Feb 04, 2011 10:46 pm

Zack A wrote:

Get me pics asap!!! I've just got to find time to get everything installed. I changed and bought a digital Oil Pressure gauge instead of the analog one, just waiting for it to come in. Where did you get the T connector and everything?

got the t connector at oreileys (murrays)

I'll add the pics soon, just need to get a point and shoot!

CoopaTroopa · **Posted:** Tue Mar 08, 2011 8:49 am

Pics?

STINGN · **Posted:** Tue Mar 08, 2011 7:53 pm

i will get some this weekend...i still dont have a point and shoot...and a dslr is not gonna cut it (cant get close enough with a prime lens)

CoopaTroopa · **Posted:** Tue Mar 08, 2011 9:20 pm

Sounds good!

sota · **Joined:** Fri Aug 07, 2009 7:44 pm **Posts:** 379

very interested as i'd like to add at least an oil pressure gauge. I don't trust idiot lights as usually by the time they come on Really Bad Things have already happened.

STINGN · **Posted:** Wed Mar 09, 2011 9:19 pm

sota wrote:

very interested as i'd like to add at least an oil pressure gauge. I don't trust idiot lights as usually by the time they come on Really Bad Things have already happened.

which is exactly what happened to me :frankie:

sota · **Joined:** Fri Aug 07, 2009 7:44 pm **Posts:** 379

hate to bug but, you get those pics yet?

Hydraulic Jack · **Posted:** Tue Mar 15, 2011 11:53 am

I use my grab bar....Is there any way to keep the bar with the gauge pods? HJ

Zack A · **Posted:** Tue Mar 15, 2011 11:05 pm

Hydraulic Jack · **Posted:** Tue Mar 15, 2011 11:08 pm

I didn't think so....Thanks....HJ

sota · **Joined:** Fri Aug 07, 2009 7:44 pm **Posts:** 379

there was a picture floating around the internet of someone who'd put a pair of prosport gauges onto the side of the gauge binnacle. they used the pods that came with gauges and with a little work covering the wires would look pretty decent.

STINGN · **Posted:** Sat Mar 26, 2011 2:46 pm

STINGN wrote:

everything is installed and working

Gauge Pod holder has to be mounted to the original pod we have with the grab bar off OR you can drill through the metal A-Pillar and take some longer screws to hold it one, which is what I did. I will add pictures later.

For the wiring

Volts- Positive (for the Unit and for the light) went to my Radio power.
Oil - Positive (unit and lights) went to the cig power.

For both of the negatives I wired them together (2 volts and 2 oil) and then placed them on a ground near the gas peddle.

I will be adding pictures soon when i get a point and shoot, my DSLR will not focus that close or fit in those spots lol

still dont have a camera, so here are my cell pics

CoopaTroopa · **Posted:** Sun Mar 27, 2011 9:50 pm

wow looks great is your interior a grayish color or more tan? hard to tell.

STINGN · **Posted:** Sun Mar 27, 2011 11:23 pm

tan...its the exact same as yours lol

CoopaTroopa · **Posted:** Mon Mar 28, 2011 11:37 am

I can see it now. Hard to tell on my touch but they are definately the same color. I always considered it more of a nutral grey

Carmodifier · **Posted:** Sun Jul 24, 2011 12:48 am

W9JAB wrote:

http://www.jeepinbyal.com

I can't seem to find a pod for a 2006 liberty, I e-mailed them and asked if this one will work but haven't got a reply yet. :furious:

I would also like to install an a-pillar gauge holder in my '06 KJ. Did they ever reply to your email in regards to the pod made for the '02-'05 KJ's working for a '06 KJ...?

Gauge Pods

Who is online