Anyone have experience running 15x8 Mickey Thompson II wheels on a Liberty. Looking at a set of used ones, but don't know if they will fit(caliper clearance). Can't easily check myself as the wheels are 400 miles away. Any help would be appreciated. Thanks

_________________
2005 Liberty Sport CRD

GDE HOT Tune
GDE TCM
EH Mod
Euro T.C.
3" straight exhaust w/cat delete
Cone air filter
Ome lift springs
Bilstein shocks & struts

More than likely not
Only 15s that really fit are steel ones like Soft 8s

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Depending on the Backspace they may actually work, I have tried a lot of wheels on my KJ and found that all of them that wouldn't work rubbed on the TRE pretty hard and not the caliper as I had read in other places. Try one on if you can the front is the only issue so no need too bother with trying one on the back.