It is currently Fri Mar 29, 2024 11:02 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: For CRD 2.5 owners - What tyres are you running?
PostPosted: Tue Oct 11, 2011 12:58 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Hi,

Sorry to put it mainly to the CRD 2.5 owners, but please feel free anyone chime in too, I would like to know what tyres you are using?

I currently after my lift I am am running 245/75R16 MT, but I am looking to get another set ( to repalce the stock 235/70R16 o have) to run arround all the time and use the MT only for play days?

I am looking to fit again or 245/75R16 or 265/70R16, I am really tempted to go 265/75R16 as I think there is enough room now, but I think it might kill the KJ ( my diff rations are 4.10 as standard).

Please any Ideas & Advise
Tks,
Fil.

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: For CRD 2.5 owners - What tyres are you running?
PostPosted: Wed Oct 12, 2011 5:23 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Mar 26, 2007 6:21 pm
Posts: 970
Location: Somewhere in Australia - or not, as the case may be.
Firstly it doesn't really matter whether you have the 2.5 or the 2.8 (or even the 3.7) as far as tyre sizes go.

245/75R16s are a pretty common choice down under - you need at least a 2" lift to make them work and a lot of guys also hammer flat the pinch weld at the back of the wheel arch to give sufficient clearance. You may still get some rubbing on full lock.

You may be able to fit 265/75R16s but I expect that you would need a bigger lift and a lot of trimming to make them work, and even then they would rub somewhere on lock. Personally I would advise against trying.

You already have the 4.10 diffs which is a bonus. If you have an auto gearbox then you need to get the computer reflashed for the correct revs/km, otherwise your transmission will be confused and try to change gear at the wrong time.

_________________
November 2006 2.8 CRD manual, CRDSTU front springs, King HD rears, Polyairs, LT245/70R16 Pirelli Scorpion ATRs, DP chip, Airflow snorkel
TJM alloy front bar, Ox 9500lb winch, Hella Compact 4000 spots, Complete set Mopar skid plates, Mopar cargo barrier
GME TX3440 UHF, Codan NGT HF


Top
 Profile  
 
 Post subject: Re: For CRD 2.5 owners - What tyres are you running?
PostPosted: Wed Oct 12, 2011 5:39 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Hi,
thank you for your answer. I have a 3.5 inc lift, i am sitting at 22 inc at the front & 22.5inc at the back. I guess then I better stick with 245/75R16 or if I find a narrow 265/70R16, but i know from what i have read and seen here that 235/85R16 or 265/75R16 will fit (yes i will need to pound the pinch weld), but I just want to know if the CRD 2.5 has enough power, most of the people running them have 2.8 with 4.10 gears.
Thanks,
Fil

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: For CRD 2.5 owners - What tyres are you running?
PostPosted: Wed Oct 12, 2011 8:12 pm 
Offline
LOST Member
User avatar

Joined: Mon Dec 13, 2010 2:33 pm
Posts: 240
Location: Vincennes indiana
I run 31x10.50 on 15x10 wheels

_________________
2006 crd
Orm and ehm
Straight pipe and filter box mods
Ome lift with 31x10.50 tires and 15x10 wheels
Bedlined flares and rockers
Tj custom bumper mod
Scorpion diesel tuner


Top
 Profile  
 
 Post subject: Re: For CRD 2.5 owners - What tyres are you running?
PostPosted: Wed Oct 12, 2011 8:27 pm 
Offline
LOST Addict
User avatar

Joined: Sun Apr 01, 2007 11:03 pm
Posts: 1786
Location: Australia with the Kangaroos
Yeah, the mighty little 2.5 CRD certainly handles the bigger tyres. I have 3-4 inch lift and run 31/10.5/15s in a Mickey Thompson MTZ on 15in steelies, they are a 15x7 zero offset. I am also now running Mickey Thompon STZ 265/70/16s on my original Jeep Alloys, and they are great. I have heaps of power (I do have a custom free flow exhaust - made a heap of extra low dow grunt) With the MTZ's on I get around the 12lts per 100km, with the STZ's on I'm getting 10.5 lts per 100km. Stll have great power, drives up hill just as it did with no lift and standard tyres.

Theres a pic here of the new 265/70/16's

http://www.ausjeepoffroad.com/forum/sho ... tcount=994

_________________
SOME SAY

I'm Toight... Toight lik a Toiger.

And

When I go to the Toilet, Chuck Norris is there to tear the squares off for me.

"Pass me another one Chuck, and keep em coming!! On sencond thoughts..Go get the hose"


Top
 Profile  
 
 Post subject: Re: For CRD 2.5 owners - What tyres are you running?
PostPosted: Wed Oct 12, 2011 9:33 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Pippobug wrote:
Hi,
thank you for your answer. I have a 3.5 inc lift, i am sitting at 22 inc at the front & 22.5inc at the back. I guess then I better stick with 245/75R16 or if I find a narrow 265/70R16, but i know from what i have read and seen here that 235/85R16 or 265/75R16 will fit (yes i will need to pound the pinch weld), but I just want to know if the CRD 2.5 has enough power, most of the people running them have 2.8 with 4.10 gears.
Thanks,
Fil


You've only at a 3 inch lift with sitting at 22 inches in the front ( stock is 19 inches) I'd stay with 245-75-16s or 265-70-16s
265-75s will be a little big for where you are

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: For CRD 2.5 owners - What tyres are you running?
PostPosted: Thu Oct 13, 2011 2:40 am 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Tommudd,
Yes, I have sort of come to the same conclusion myself,it was more out of curiosity. I know it can be done and it has been done, but I haven't seen anyone with a CRD 2.5 ( well it looks like there is one in Italy on 235/85R16 and he is happy with it, I will ask him). Still deciding if to go 245/75 or 265/70 they will be AT as I have a set of MT already.
Quick question will I need spacers if I fit 265/70? I am going to use the stock alloys that i think are 16x7.
Fil.

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: For CRD 2.5 owners - What tyres are you running?
PostPosted: Thu Oct 13, 2011 6:27 am 
Offline
LOST Junkie
User avatar

Joined: Sat Oct 02, 2010 7:33 pm
Posts: 552
Location: Long Island
If your using the stock rims, then yes spacers will more then likely be needed. When i first got my tires, i was sitting at 21.5 and the 265-70-16's would only rub at certain angles under the right suspension articulation in front. But before i got spacers for them, would would rub, HARD on the sway bar. 1.25 spacers took the rub off the sway bar, but slightly increased the rub where the pinch weld is.. Its very minimal and I wouldnt second guess putting another pair of 265's on. 245's look like pizza cutters to me :2cents:

_________________
06 CRD limited
Frankenlift, JBA 1/4 top plate, 3 clevis rings, 3 stacked iso's
JBA UCA and quick disconnects
Procomp rockkrawlr 16x8 4.25bs with 265-70-65 General Grabber AT2's
Mopar full skid plates, JCR stage 3 Rock Rails
Kenwood HU, 6.5 pioneer marine grade door speakers, JL stealthbox kenwood amp
GDE HOT tune
Soon to come
RL Rock monitor bumper


Top
 Profile  
 
 Post subject: Re: For CRD 2.5 owners - What tyres are you running?
PostPosted: Mon Nov 14, 2011 8:22 am 
Offline
LOST Newbie

Joined: Fri Jul 09, 2010 2:33 pm
Posts: 43
Location: Rangiora New Zealand
I am from UK not long been down under, i got my tyres and wheel combo done via a search on auto trader, as things are so tight for the traders at the moment in the UK I was able to squeeze a very tidy deal out of silverline wheel and Tyre I got crager 15x8 and bighorn and a great price. I know its a bit of a trek 01926 490002 is the No, or try tyres direct they do some sharp deals as well. My self I run 31.10.55.15s and not to much of a problem heat gun gets plastics sorted. :2cents:


Top
 Profile  
 
 Post subject: Re: For CRD 2.5 owners - What tyres are you running?
PostPosted: Mon Nov 14, 2011 9:51 am 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Hi dmuddy,

I have now changed my tyres and stayed with 245/75R16 and got a new set of Grabber AT New style not the AT2. I also squized a good deal out of them, got about £60 off them.
Hope you are enojoying life Downunder.

Fil.

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com