I am Looking to replace (Up grade) my Torque Converter. I looked at Suncoast but don"t really want to spend $700.00 on one. Who Has a good replacement that I won't have to worry about? The transmission was replaced last year and starting to have problems again. Thanks

euro torque converter - 68037142AA

_________________
06 CRD/samco's/GDE eco tune/fumoto/toyo H/T /brake controller/tow package

04 TJ/3" OME/1" MML/1"BBL/3/4" coil spacers up front/discos/Extended bump stops/adj. Rear track bar/hi-lift/ 33x10.5x15 toyo MT on steelies/Epi9000superwinch/nates front bumper/extended breathers/160amp alternator

I believe that number has been updated.

_________________
Resurrected 2005 Liberty Sport CRD
Canadian DRL mod

CRD Motor/Timing Pics
http://www.flickr.com/photos/68442076@N02/sets/72157629389449367/

Plus it is now a rebuild and they raised the price making the Suncoast price look better.
Another option is to have yours rebuilt with better friction material and better dampener springs.
To be honest Sonnax sells parts to any one who pays for them, so you can build what you want.
Suncoast buys Sonnax parts that meet their specs and do the job when they build the converters they sell.
Please don't ask what Suncoast or other custom builders use for the stator,rotors, or turbines that is like buying a suit to wear to a Funeral or wedding and returning it to the store.

Euro guts exposed in this post: viewtopic.php?f=5&t=51892&hilit=+Euro
Now you can have a better than Euro built in your local TC rebuild shop.

_________________
2006 Pearl Green CRD
Magnaflow 2 1/2" Cat Back
KJ Extra Leg Room Brackets, Carter Lift Pump, V6 Airbox, ORM
Fuel cooler, Oil Separator, Progard 7
Gauges EGT Boost Trans Temp Oil Pres, Michelin LXT AT2 245 70 R16
7,000# Draw Tight hitch, PML EX Deep Trans Pan
Centrifuge, SunCoast, Transgo, RAM TCM, InMotion Stage 2
Wife's 99 TDI VW Beetle

new # RL037142aa
this is not a reman unit
as told to me by chrysler parts specifier
this is the same converter as 68037142aa
it is a relabeled part # RL037142aa see the similarity in the npart #S
re-labeld means thy want core to build stock for future shortages then it will go to a rm#
all chrysler reman parts start with RM
by the way there is one 68037142aa converter left in us stock
its at a dealer in vermont.

MODS - CAN THIS BE A STICKY???? I spent plenty of time researching and called the dealer with the old parth number. They gave me the correct one. When i searched the new number on the site, this post came up. With all the TC issues on these little beasts, this would be great up at the top!

_________________
05 CRD Limited
GDE Hot Tune
Samco CAC Hoses
OME 790 and Bilstein 916 up front
OME 948 and OME N132L in rear
245/75/16 Treadwright Warden A/T on Richard Cepek DC-2
Euro torque converter
Renegade roof lights
Pioneer Z110bt double din navi w/ reverse cam

You might want to read this:

viewtopic.php?f=5&t=49227

DOC

_________________
2005 KJ CRD Ltd Detroit TrueTrac Bilsteins G2 GDE "HOT" ECU GDE TCM "Tow Tune" "euro" TC SEGR Weeks Elbow New HG at 130K ARPs Clean CAT aFe Filter Magnaflow Exhaust EHM Cumminos In-Tank Lift Pump Hayden Fan Clutch Nylon Fan VH Enabled with GDE lower shutoff point Recalibrated Temp Gauge Tekonsha Prodigy Sears P-1 ZDDP

You only indicated that you are having "transmission problems". We need a lot more details if we are going to try to help.

DOC

_________________
2005 KJ CRD Ltd Detroit TrueTrac Bilsteins G2 GDE "HOT" ECU GDE TCM "Tow Tune" "euro" TC SEGR Weeks Elbow New HG at 130K ARPs Clean CAT aFe Filter Magnaflow Exhaust EHM Cumminos In-Tank Lift Pump Hayden Fan Clutch Nylon Fan VH Enabled with GDE lower shutoff point Recalibrated Temp Gauge Tekonsha Prodigy Sears P-1 ZDDP