What have you done to your KK lately

Nighttracker · **Joined:** Wed Feb 08, 2012 7:27 pm **Posts:** 7

collins1888 wrote:

painted the grill black today. Next on to my brothers WK wheels

Very nice. Looks good

3rdjeep · **Posted:** Sun Mar 11, 2012 10:49 pm

musclezmarinara wrote:

looks like a great install, but not a fan of the curt as it hangs down lower than stock :/

I have dinged the bumper a few times hitching alone in the past and wanted extra space between the ball and the plastics. Didn't need any holes on the bumper the curt sticks out far enough as to not having any trouble hitching by myself. yes it hangs lower and further out but hey let someone bump into it before the plastics. :ROTFL:

as for angles of departure well we'll see how that goes

Marlon_JBT · **Posted:** Sun Mar 11, 2012 10:56 pm

Hey, I know that garage!

I've been in there a few times.

tommudd · **Posted:** Sun Mar 11, 2012 10:58 pm

Marlon_JBT wrote:

Hey, I know that garage!

I've been in there a few times.

I think today!!!

Heres another shot for all of you KK owners

At The Helm · **Posted:** Mon Mar 12, 2012 11:51 am

tommudd wrote:

Marlon_JBT wrote:

Hey, I know that garage!

I've been in there a few times.

I think today!!!

Heres another shot for all of you KK owners

Nice!! Can we have some details?
From what I see:
Its a whole receiver/ tire carrier assembly that mounts from the receiver hitch mounting points.
It looks like it has a logo on it like a shop or fab company made it?

KK_Canuck_Guy · **Posted:** Mon Mar 12, 2012 1:42 pm

Atthehelm wrote:

tommudd wrote:

Marlon_JBT wrote:

Hey, I know that garage!

I've been in there a few times.

I think today!!!

Heres another shot for all of you KK owners

Nice!! Can we have some details?
From what I see:
Its a whole receiver/ tire carrier assembly that mounts from the receiver hitch mounting points.
It looks like it has a logo on it like a shop or fab company made it?

Second that! ^^ details on that sweet lookin rear tire carrier please!!

Airdown4 · **Joined:** Mon Mar 12, 2012 3:21 pm **Posts:** 1

Heres another shot for all of you KK owners

[/quote]
Nice!! Can we have some details?
From what I see:
Its a whole receiver/ tire carrier assembly that mounts from the receiver hitch mounting points.
It looks like it has a logo on it like a shop or fab company made it?[/quote]

Second that! ^^ details on that sweet lookin rear tire carrier please!!

[/quote]

I like that so much it made me register! :wink:

tommudd · **Posted:** Mon Mar 12, 2012 7:12 pm

Its a prototype, talk to Ted15 and he can fill you all in, its a sweet piece for sure

from the Ohio section
das4x4 wrote:
Hey Ted,
Is the knucklebone on the market or still a prototype? I don't see it on Detour's site. Can you shed some info on it?

From what I understand, mine is a production prototype so I would have to say that if it's not yer on the market, it will be. Their number (from the website) is (606) 845-0024 (606) 845-0024 or detoursusa.com. I'm sure they can answer your questions better than I can.

DoomedKK · **Posted:** Mon Mar 12, 2012 10:09 pm

tommudd wrote:

I know what Ted15 did today :wink:

came over to my garage and played for a while

and added a prototype addition to the rear as well
but have to wait until he says its OK to release the photos :twisted:

What are the details on the winch on the front bumper? or is it a prototype?

I don't want a grille guard or bull bar, but am wanting a winch.

tommudd · **Posted:** Mon Mar 12, 2012 10:23 pm

Contact detours they make them ( front winch mount)

Marlon_JBT · **Posted:** Wed Mar 14, 2012 1:49 pm

remdawg · **Joined:** Fri Nov 12, 2010 2:05 pm **Posts:** 204

Marlon_JBT wrote:

Is the UCA resting against the coil?

Marlon_JBT · **Posted:** Wed Mar 14, 2012 3:47 pm

remdawg wrote:

Marlon_JBT wrote:

Is the UCA resting against the coil?

No. It just looks like that. Bad picture.

sgsmith · **Posted:** Fri Mar 16, 2012 3:44 pm

Ordered skid plates, tow hooks and rubber floor mats for it today

norcalarctic · **Posted:** Fri Mar 16, 2012 8:49 pm

Marlon_JBT are you :lol:

laughing at the oem UCA? Is that a OME sport strut and coil??? So I hope to get my JBA's gen 5.5s in the near future, winter stroms :grim:

might delay things for shiping...OME S-struts and rear coils on back order in Washington :mrgreen:

.

Marlon_JBT · **Posted:** Sat Mar 17, 2012 10:11 pm

It is an OME shock and coil. I'm laughing because I only posted one picture, and not the rest of them, you gotta look around for those.

lammarco · **Joined:** Sun Mar 18, 2012 3:37 pm **Posts:** 274

Just ordered the in-dash GPS and planning to put some LED lights as well...I got the parts for remote start...so I will install that when I return from the business trip...I never thought I can have that much fun to mod my jeep...BEST SUV ever!

I will post some pictures soon!

sgsmith · **Posted:** Mon Mar 19, 2012 9:32 am

Extended the front and rear diff, transmission and transfer case breathers. Took about 3 hours to do all four lines.

Mike08Liberty · **Posted:** Mon Mar 19, 2012 10:13 am

I haven't done much ... Just wrapped the whole truck in 3M Carbon Fiber, put some 22" Vossen wheels custom wrapped in 3M Carbon Fiber and blacked out all the lights. Thats it ... :twisted:

More pics and info here viewtopic.php?f=6&t=65875

JEEPIN36COKK · **Posted:** Mon Mar 19, 2012 11:24 pm

Well drove the poo poo out of her Sunday, went to Glennwood Springs, Colorado to soak my old butt in the hot springs pool out there. Smooth sailing going out. Coming back that night, nice snow storm blew in, had to stop in Vail, rest my eyes from driving thru lightspeed vision out the windshield. Drove like a champ up those steep grades, was able to pass, get away from people and going down hill, seemed to have it's own engine brake, even down the real steep stuff, kept checking the e-brake, never really went above 70 or so, figure it was the little bigger tires, definately glad I got rid of the STs coming back, Love my new KK.

What have you done to your KK lately

Who is online