It is currently Thu Mar 28, 2024 7:45 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: £££ ?
PostPosted: Mon Apr 30, 2012 4:30 am 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Hi all dumb newb question time again :roll:

My KJ is booked in this Thursday for a new cam belt, and as I posted in the CRD section, I am worrying a bit about a "tap tap tap" sound that I get once the engine is warm :cry: ... have had a couple replys with things to check (though I dont think I'll get much chance this week cus of my shift patern, before it goes in :roll: ) and wondered if A. anyone knows roughly what the cam belt change will cost here in the UK ? and B. if I ask them to look into the tapping noise (which I guess could be cam, follower, etc related) .. I'm guessing I'll need to sell a bodily organ to pay for it right ? :?

Cheer's

Andy.

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Mon Apr 30, 2012 5:15 am 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Andy

I did mine at Jeep Dealer CRD 2.5 at 80k mls and it set me back £ 790.00 for the FULL Service. To be honest I didn't think it was to bad, my bike cost me as much to have it serviced it was a major service may I add.
For what concerns the noises, it's a bit hard to answer without hearing it. Could be the belt or one of the pullys, I am sure they will advise accordingly.

Fil.

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Mon Apr 30, 2012 5:51 am 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Pippobug wrote:
Andy

I did mine at Jeep Dealer CRD 2.5 at 80k mls and it set me back £ 790.00 for the FULL Service. To be honest I didn't think it was to bad, my bike cost me as much to have it serviced it was a major service may I add.
For what concerns the noises, it's a bit hard to answer without hearing it. Could be the belt or one of the pullys, I am sure they will advise accordingly.

Fil.


Hey Fil,

Yeah I realise its not easy to diagnose issues on someones discription, but it is just a "tap tap tap tap" sound that rise's and falls with the revs ? ... just thinkin if I ask them to investigate, it could end up being a top end strip/rebuild :x I'm using a well respected garage about half a mile away cus the nearest dealership is a fair way for me, but he is a good bloke and always busy :wink:

What bike ya got mate ? (I service all my own bike's, but they are pretty simple ...... but effective :twisted: )

Andy

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Mon Apr 30, 2012 6:15 am 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Andy

i have a Yamaha TDM 900 and it was the 24Kmls service that requires the head to be shimmed, that's way the bill is so high.

I guess if you know the Garage you should be okay. I suppose best get belt done ans see if it quiets down, failing that might want to take it to be done by Jeep or a VM specialist in the area.

Fil.

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Mon Apr 30, 2012 3:14 pm 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Pippobug wrote:
Andy

i have a Yamaha TDM 900 and it was the 24Kmls service that requires the head to be shimmed, that's way the bill is so high.

I guess if you know the Garage you should be okay. I suppose best get belt done ans see if it quiets down, failing that might want to take it to be done by Jeep or a VM specialist in the area.

Fil.


Hi Fil, had a good listen today, and it appears to actually be coming from the somewhere behind engine or underneath !! :shock: (see my "£££" thread in the CRD forum)

Something springy came in the post today :mrgreen:

Image

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Tue May 01, 2012 3:35 am 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Andy

Very nice looking these H&R, I thought they were black, but Blue looks nicer. It will look very nice with the yellow Bildstein shocks. Can't wait to see them on & have some feed back from you.

For the noise, I have see your post, but I am affraid I can't help you, I am sure someone will come with the correct answer to the problem. Did you read the Nooby guide in the CRD section? might help.

Fil.

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Tue May 01, 2012 5:58 am 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Yeah I was expecting black or grey, so the blue was a nice suprise :D , tho I think I'm gonna wait and see how much the garage bill is going to be at the end of the week before ordering another £500 worth of shocks !!!! :shock:

Do you or anyone else know what the OE frt/rr springs measure in height unladen, and standing free on the floor ?

also these look pretty hefty section, I'll have to get under the Jeep with my digital vernier and check the thickness of the OE ones on at the mo :)

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Tue May 01, 2012 6:38 am 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Andy,

No idea of the height of a standard OE spring, but you can have a look at this topic here where it shows the difference between the orignal and the H&R springs : http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=5&t=51044.
You can see the H&R are longer.
Good luck with you service this week, hope it all goes well and the tapping stops.


Fil.

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Tue May 01, 2012 5:00 pm 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Cheers bud :wink:

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Fri May 04, 2012 5:42 pm 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Bilsteins now ordered, and KJ booked in to have springs/shocks fitted, and the tracking and camber reset a week on Wednesday :mrgreen:

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Sat May 19, 2012 5:55 am 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Andy
Did you get the H&R and Bildstein fitted this week? We want to see Photos? or as they say it never happend :wink: :lol:
Fil.

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Sun May 20, 2012 6:36 am 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Sure did Fil :D .. still only sittin at 20" up front, and a little higher at the back, but has made such a differance :D

I'm slowely turning it into a purpose built camping, touring, trail driving truck that will take me anywhere I need to go in any weather ... well thats the plan :mrgreen:

I'll put up a couple pics once the roof rack, tints, tyres are on :wink: ... nothing much to see at the mo :|

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Sun May 20, 2012 1:57 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Mar 06, 2010 7:10 pm
Posts: 664
Location: Cambridge, United Kingdom
Did you camber & tracking sorted out? it's important otherwise it won't handle well.
Are you happy now with how it handles?
Fil

_________________
CRD 2.5 2003
Image
Snorkel
Curt Front Hitch+Warn M8000 & Cradel
Asfir Front, Gearbox,Transfer Skid + Mopar Tank Skid
BF Goodridge KM2 & General Grabbers AT 245/75R16
OME NS131&790 + NS132L&948, 3/8 Boiler Top Plate, JBA 4.5, 2 Top Rear Isolators


Top
 Profile  
 
 Post subject: Re: £££ ?
PostPosted: Sun May 20, 2012 2:57 pm 
Offline
LOST Member
User avatar

Joined: Fri Apr 13, 2012 5:09 am
Posts: 192
Location: West Midlands. England
Yeah been upto 70 so far and nowt to report :D .. bit supprised about the Bilstiens to be honest rather than the springs! thought they would be stiffer than they are! feels slightly under damped at the front to me, but not an issue, and soak's up the bumps brilliantly on our shockin roads :evil:

_________________
05, 2.8 CRD Sport (6 speed manual)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com