SFA unit bearing that matches ABS count on 06 CRD

mentelorientel · **Joined:** Fri Jul 20, 2012 3:56 pm **Posts:** 2

I am planning on retrofitting an 06 CRD into a CJ8. has any one found a way around the front ABS sensors. Do JK or any other straight axle units tone wheel counts match?

Thanks Matt

Rich · **Posted:** Tue Jan 01, 2013 4:02 am

Pretty hot, I love the scramblers almost as much as a CJ6.

I would contact Burnsville Offroad (http://burnsvilleoffroad.com/) and inquire how they fixed that issue with their JK swaps. Would GDE be able to program the PCM/TCM to ignore those signals, or are you worried about ESP trying to take over?

Srytrucker · **Posted:** Tue Jan 01, 2013 9:11 am

On other posting heard that late model F 250 Sfa have similar pulse tone and should work....it is hear say at this point not confirmed....good luck.....happy new year...

mentelorientel · **Joined:** Fri Jul 20, 2012 3:56 pm **Posts:** 2

My plan was to transfer everything into the CJ except the air bags and use the Liberty harness complete.

Thanks Matt

Sir Sam · **Posted:** Wed Jan 02, 2013 10:41 pm

See my swap thread for more information, the short of it is you can basically run the engine harness standalone via the couple of connectors by the passenger firewall.

SFA unit bearing that matches ABS count on 06 CRD

Who is online