Hey guys, it's that time for me (actually, I am on barrowed time by 10K miles YIKES).

Does anyone have a time belt replacement pin set for the let and right cam and the fly wheel? These are parts VM.1052, VM.1053, and VM.1083 from Miller Speciality (and that's without a pin wrech or a wrench to break the cam timing pulley bolts loose).

Looks like I also need a "pin wrench" in order to properly tension the idler pulley(s)??? Never had to do that on a domestic/gasser.

Thanks,

Marc

Where do you live?

_________________
05 Liberty CRD Sport with Leather 115k
GDE ECO, No EGR, no FCV, (system gone)
Oil Drain plug P/N 090-039
K&N Air Filter, 2nd gen Fuel filter head
NEW Rockers & lifters
Mobil 1 0w-40
Stant 13519 195 deg inline Thermostat.
0 281 002 845 MAP
Etecno GX3123 7v Glow Plugs
Advance Gold 800CCA Battery
Traded it for a Quality VW TDI

I am in Louisville, KY.

BTW, which GDE tune do you have and would you recommend it? Good value?

I have a ECO tune. I was just looking to delete the EGR and improve MPG and power slightly. I dont beleve in pushing diesel engines. So i did not add any higher tunes.

_________________
05 Liberty CRD Sport with Leather 115k
GDE ECO, No EGR, no FCV, (system gone)
Oil Drain plug P/N 090-039
K&N Air Filter, 2nd gen Fuel filter head
NEW Rockers & lifters
Mobil 1 0w-40
Stant 13519 195 deg inline Thermostat.
0 281 002 845 MAP
Etecno GX3123 7v Glow Plugs
Advance Gold 800CCA Battery
Traded it for a Quality VW TDI

My mechanic used the correct size rubber tubing with a drill bit inside for the correct size to make his own pins.

Just an idea..

You can order a Sealey kit which has all 3 pins and your wrench for under $100 shipped.

The VM.1085 is another monster altogether.

_________________
Silver 2006 KJ 2.8L CRD Limited:
GDE ECO Tune / Fumoto Valve / E-Tecno GX3123 7v Glow Plugs / 2nd Gen Fuel Head / Mishimoto RED Hoses / Rockers/Lifters @ 114k / Hayden FC + 11 Blade Nylon / Sears P1 Battery / Transgo 45RFE-HD2 Reprogramming Kit / Timken Front Bearings

GDE Rents the Timing Tools, I don't believe they include the Pin Wrench though. You can also rent the tools from me, Check my signature, it will be a few weeks before they are back though.

_________________
2005 Jeep Liberty Sport CRD
Complete Miller CRD Tool Set (Willing to Rent)

Timing Tool Current Wait List https://docs.google.com/document/d/1Jvg_433Tfencao2HWJE3jXYB8Kk_myAtXJhmNNevqnw/edit

Timing Tool Rental FAQ https://docs.google.com/document/d/1UP7CTZ4WZCnj1HlTvpFTX2WfvhauaTwLqghNKhfjI0o/edit

The pin wrench is something of a pain to use. I'd suggest you take a look at the GDE timing belt replacement instructions for how to substitute 2 crossed allen wrenchs of the appropriate size. Looks like that might be easier to use.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

PM sent. I may have a wrench pin for the tensioner pulley if it is the same as the one used on the TDI. I will have to find it, as I haven't used it in years.

I work in Louisville, and live like 3 miles to downtown Louisville. I would love to help with the job.

_________________
06' Liberty Limited CRD, 178K miles, all stock for now. New to me as of 2/2010.
99.5 Jetta TDI
01 NB TDI
98 Jetta TDI
82 VW Caddy diesel, 5 speed

I used a universal dohc lock tool from napa ($40) and you can grab the idler pulley with a pair of channel locks just fine to adjust it.

_________________
2005 CRD
ORM / EHM
Cummins lift pump
RRO 3" lift