How to remove the bezels so that I can drill a hole for a toggle switch.

_________________
2005 CRD Green orm,ehm,oem skids, painted wheels
2005 CRD Blue orm,ehm
F250 SD forsale (SOLD)

Not sure what bezel you are talking about....most of the "covers" on the dash are clipped on and only require to be pulled on firmly to pop off....or carefully levered off!

_________________
2002 Export CRD 2.5 Sport

If it's the lower one under the steering column, do what Billwill said and give it a good tug. You pull from the top down.

_________________
--Prof

927/948 OME Springs - Bilstein Shocks - JBA Upper Control Arms - Rage Black Widow Roof Basket - Viper 3606V Alarm System

Yeah the old models like mine do not have a hinge fitted...the whole unit comes off. I want to modify mine sometime and put a hinge on it so I can have extra storage space.

I think the OP may mean the small rectangular bezels...about seven inches long by two inches high....simply pulls off. My RHD Export model has the headlight beam height adjuster fitted in it.

_________________
2002 Export CRD 2.5 Sport

I think you are right. I'm planning a few off-road lights and plan to put the switches there. I think it will look nicer and I can always replace the small piece if I mess it up or decide to take the lights off at some point.

_________________
--Prof

927/948 OME Springs - Bilstein Shocks - JBA Upper Control Arms - Rage Black Widow Roof Basket - Viper 3606V Alarm System