Rigid Industries LEDs

Lowridah313 · **Posted:** Fri Aug 09, 2013 6:52 pm

musclezmarinara wrote:

tjkj2002 wrote:

They should have a labeled wiring harness so wiring them wrong should be impossible and with a amber lense they will appear less bright.

They are defiantly wired correctly a monkey could do it and I'm an electrician :lol:

the reason I purchased amber was because they should be better in foggy weather / snow. Anyone see it otherwise? My 520 ion piaas seemed brighter.... Tom as you have these lamps any advice you can provide?

These are driving beam should I opt for a flood pattern?

I have the lower level Duallys (4 led) in a spot pattern. I will post some output pics later this weekend, if that will help.

I just read the specs on the amber and white D2s, and wow what a difference!!! I would exchange them for some white ones if you want more light.

Amber
Specifications:
Watts: 13.2
Amp Draw: 0.96
LED's: 6
Raw Lumens: 840
Lux @ 10m: 57.1
Beam Distance: 151.2
Peak Beam Intensity: 5,714

White
Specifications:
Watts: 34.5
Amp Draw: 2.50
LED's: 6
Raw Lumens: 3030
Lux @ 10m: 206.1
Beam Distance: 287.1
Peak Beam Intensity: 20,612

Lowridah313 · **Posted:** Fri Aug 09, 2013 9:27 pm

6000K 35W HIDs

Rigid Industries Duallys

Both on

Side shot

musclezmarinara · **Posted:** Sun Aug 18, 2013 10:48 am

Def gunna have to upgrade ! Lol

tjkj2002 · **Posted:** Sun Aug 18, 2013 6:39 pm

musclezmarinara wrote:

Def gunna have to upgrade ! Lol

I'm sure some have seen my pics....................

Hella 9007 bulbs,high beams............

Vision X Patriot 35 degree LED bar................

Vision X EVO Prime 20" LED lightbar(20 degree beam)................

To compare,KC 50watt HID's................

Yes I was pointed nose down,best spot I could find quickly.The end of the building is about 1000' away.

Daytime shot................

JeepMonkey190 · **Posted:** Thu Aug 22, 2013 10:01 pm

Does anyone know if its actually worth paying the extra $90 each per Dually 2?

I want to buy a 10" combo, 2 dually spots, and 2 Dually diffused or floods.

I'm just trying to figure out if paying more with this many lights is going to make a difference.

Thanks,
JeepMonkey

sjbKK · **Joined:** Mon Jan 13, 2014 3:49 pm **Posts:** 3

Lowridah313 wrote:

You can also check out gg-lighting.net

They have a full line up of bars and lifetime warranty at a fraction of the cost of Rigid.

I have a set of Rigid Duallys, I am more then happy with them.

was it hard to mount them down there? that's a really clean look

Lowridah313 · **Posted:** Tue Feb 25, 2014 7:45 pm

sjbKK wrote:

was it hard to mount them down there? that's a really clean look

Not over difficult, hardest thing was just tighten up the mounts bolts.

Rigid Industries LEDs

Who is online