Current car list (diesel)-
2005-2007 2.8 Jeep Liberty/Cherokee (KJ)
2003 2.8 Jeep Cherokee (KJ)
2002-2004 2.7 Jeep Grand Cherokee (WJ)
Does not work with the WK Grand Cherokee CRD 3.0Thanks go to:
-Nicktb for starting this, offering up his vehicles for experimentation, finding a cheap flasher that can make this work and 811 EGR/FCV delete and tuning information.
-Yeti for providing the EGR/FCV for the 808 delete part and insite
You need this, MPPS V13.02 USB-
![Image](https://i.postimg.cc/tJgzkHCb/flash01.png)
I have seen these on ebay for $18.XX US and free shipping.
You may see:
V13
V13.02
V13.02 version 2
V13.02 version 3
but I think that most of the units are exactly the same.
I ordered V13.02 and the cable is labeled V13 only.
The software is V13.02.
Later version V16 (and maybe 18) has been reported to not work. Let me know if you have one working.
Pick one up that has the updated vehicle list and includes:
-Chrysler 300C 3.0L CRD Bosch EDC16CP31-8 K-Line/CAN
-Chrysler Commander 3.0L CRD Bosch EDC16CP31-8 K-Line/CAN
-Chrysler Grand Cherokee 2.7L CRD Bosch EDC15C2 K-Line-Chrysler Grand Cherokee 3.0L CRD Bosch EDC16CP31 K-Line/CAN
-Chrysler Jeep Cherokee 2.5L CRD Bosch EDC15C2 K-Line
-Chrysler Jeep Cherokee 2.8L CRD Bosch EDC15C2 K-Line
-Chrysler Jeep Cherokee 2.8L CRD Bosch EDC16CP31 K-Line/CAN-Chrysler Jeep Cherokee 3.0L CRD Bosch EDC16CP31 K-Line/CAN
-Chrysler PT Cruiser 2.2L CRD Bosch EDC15C2 K-Line
-Chrysler PT Cruiser 2.2L CRD Bosch EDC16C2-9 K-Line/CAN
-Chrysler Voyager 2.5L CRD Bosch EDC15C2 K-Line
-Chrysler Voyager 2.8L CRD Bosch EDC15C2 K-Line
-Chrysler Voyager 3.0L CRD Bosch EDC16CP31 K-Line/CAN
I have Windows7-64bit and XP-32bit and with both I had to manually install the drivers for the cable.
-Install MPPS software and run MPPS.exe
(if MPPS asks for version and serial no. you will need to run MPPS by right clicking the icon and choosing "Run as administrator")
-Plug in cable
-Manually install drivers from Windows Device Manager under USB Controllers
>search for the "C:\MPPS\Device Driver" folder for drivers
![Image](https://i.postimg.cc/k4qsVb0B/MPPS01.png)
The software allows you to id your ecu, read and save your current map and write a modified map back to the ecu.
You need to choose:
- for 2005-2007 Liberty/Cherokee = 2.8L CRD Bosch EDC 16CP31 K-Line/CAN
- for 2003 Cherokee = 2.8L CRD Bosch EDC 15C2 K-Line
- for 2002-2004 Grand Cherokee = 2.7L CRD Bosch EDC 15C2 K-Line
MPPS is run with ignition on, engine not running.
Keep the Speed Options to the default Medium.
After Read (F2), you need to determine what software version you have.
The easiest way is just open it with Windows Wordpad.
Here is the first line of my 808:
X Ò@ Ž 1037380808P53363K0 ¼ˆ§ˆ@
The 1037380
808 number is shown.
Note that the older 1/2meg binaries don't show the version on the first line; just use Wordpad's Find function to look for "1037" in the text.
ECM Titanium software can also do this.
ECM Titanium is software that can be used to modify maps or just see what the programmer did to your tune.
It is not required.
I can't provide a legitimate download for it.
See next post for some examples.
If you do use Titanium, note that it may designate the hardware differently than MPPS.
Liberty/Cherokee:
-2003-2.8 (Europe) will show as EDC15C2, software 1037366603, ECM Titanium driver J063_603
-2005 (American) will show as EDC16C31, software 1037380811, ECM Titanium driver CXXX_811
-2005 (Europe) will show as EDC16C2-9.9X, software 1037380809, ECM Titanium driver JXXX_809
-2006 (American) will show as EDC16C2-9.9X, software 1037380808, ECM Titanium driver CXXX_808
-2006 (American-?) will show as EDC16C2-9.9X, software 1037377526, ECM Titanium driver C475_526
-2006 (Europe) will show as EDC16C2-9.9X, software 1037377513, ECM Titanium driver C594_513
-2007 (Europe) will show as EDC16C2-9.9X, software 1037380812, ECM Titanium driver CXXX_812
-2007 (South American?) will show as EDC16C31xxx-.813, software 1037380813, ECM Titanium driver JXXX_813
For every 2005-2007 example so far that has been sent to me, the hardware has been labeled as EDC16C31 for the "Info" button.
Grand Cherokee:
-2002 (Europe) will show as EDC15C2, software 1037366704, ECM Titanium driver J094_704
Safety notes:
-it is safer to have the Jeep's battery on a charger when doing this
-it is safer to have your laptop plugged into AC
-turn off wireless, bluetooth, screen saver, widgets and any other application that may steal cpu resources
-keep a copy of your original read file
If you modify a map, you need to finish the changes by calculating the checksum (that "represents" the data).
The ECU will verify that the write was completed correctly via this checksum.
Maps are not ECU specific only software specific. The modified map in my 2006 Jeep will work in someone elses 2006 but not in some others 2005.
Please refrain from contacting members by PM en masse for maps. (note, Dropbox may request you to sign up. If you don't have the option at the bottom to just download, cancel and try the download again. No need to sign up.)
Use at your own risk.
Note about glow plug management:This hasn't changed for years. If you updated your 7 volt glow plugs to 5 volt and had to have the ecu flashed, it was because you didn't have the latest 7 volt map.
If you have the latest 7 volt map, you can use either 5 or 7 volt glow plugs.
see:
viewtopic.php?f=5&t=83328&hilit=GLOW+Plug+management+got+itSo if you are currently running 5v glow plugs, you will be able to use any of the appropriate tunes below.
Tunes:Nick's 808 EGR/FCV delete + (some) HP tune (vers 1.01), link-
https://www.dropbox.com/s/cfjaakd7ma4qu ... .01%29.binNick's 811 EGR/FCV delete - stock, link-
https://www.dropbox.com/s/z7bsfko2gl3rk ... k_Tune.binNick's 811 EGR/FCV delete + Stage 1 tune (vers 1.01), link-
https://www.dropbox.com/s/jb5lt636epq13 ... .01%29.binYeti's 808 EGR/FCV delete - stock, link-
https://www.dropbox.com/s/yd02x3mlcb9eg ... k_Tune.binYeti's 808 EGR/FCV delete + Mild tune (vers 1.02) - 450Nm, link-
https://www.dropbox.com/s/bp92djgcim1z9 ... -450Nm.bin -description-
viewtopic.php?f=98&t=78418&start=58Yeti's 808 EGR/FCV/DTC code delete + Mild tune (vers 1.02) - 450Nm, link-
https://www.dropbox.com/s/tra51ba820u8d ... m.bin?dl=0Yeti's 808 EGR/FCV delete + Stage 2 Hot tune (vers 1.01) - 480Nm, link-
https://www.dropbox.com/s/hie5p7bw2h35z ... -480Nm.binYeti's 811 EGR/FCV delete + Stage 2 Hot tune (vers 1.02) - 450Nm, link-
https://www.dropbox.com/s/zgwmmqaz5wk0a ... -450Nm.bin -description-
viewtopic.php?f=98&t=78418&start=60Yeti's 811 EGR/FCV delete + Stage 4 Hot tune (vers 1.00), link-
https://www.dropbox.com/s/kg6340yv821tq ... .00%29.bin -description-
viewtopic.php?f=98&t=78418&start=313Yeti's 811 EGR/FCV/MAF-P0101 delete + Stage 4 Hot tune (vers 1.02), link-
https://www.dropbox.com/s/re5kogr4z6fue ... 2.bin?dl=0Yeti's 812 EGR/FCV delete - stock, link-
https://www.dropbox.com/s/rkokvq4jm92vr ... k_Tune.bin809 EGR/FCV delete - stock, link-
https://www.dropbox.com/s/rb38g4iphh8zw ... k_Tune.binHrastProgrammer's 513 EGR/FCV delete - stock, link-
https://www.dropbox.com/s/xr9ig6x88v2wk ... e.bin?dl=0apardo001's 806 EGR/FCV delete - stock, link-
https://www.dropbox.com/s/k7bbm6dsh23no ... e.Bin?dl=0Greybeast's 526 EGR/FCV delete - stock, link-
https://www.dropbox.com/s/7mnc10kltjlz5 ... e.bin?dl=0Dez's 035 EGR/FCV delete - stock, link-
https://www.dropbox.com/s/ttilfd8wfwi7a ... e.Bin?dl=0Sir Sam's 603 EGR/FCV/P0610 delete - stock, link-
https://www.dropbox.com/s/7ohx9puwnux6a ... e.bin?dl=0Quote:
If you do not see your vehicles software version listed above, you may contact (email or PM) Marco Giacomelli (a.k.a. Yeti) on this forum or on FaceBook for a custom tune that he can provide for you. You must contact him for further details & pricing.
FaceBook contact info:>
https://www.facebook.com/profile.php?id=100011557657029Note: DTC code delete removes the P1140 error that is produced by removing (unplugging) the FCV.
Dez modified a few of the favorite 808 mild tunes with the P0403 and P1140 error delete
(Mild 808 Yeti, Mild 808 Nick, Stock 808 Nick tunes):
viewtopic.php?f=98&t=78418&p=920771&hilit=Stock+808+Tune+with+P0403%2CP1140+Deleted#p920771Did you lose your original map? These are the oem stock tunes.
513, link-
https://www.dropbox.com/s/51fewr0p45hvs ... k.Bin?dl=0516, link-
https://www.dropbox.com/s/mcpknv0lw08aw ... k.Bin?dl=0?524, link-
https://www.dropbox.com/s/zspbswbw3l0lh ... k.Bin?dl=0525*, link-
https://www.dropbox.com/s/lq77fjh8xqi19 ... k.bin?dl=0526, link-
https://www.dropbox.com/s/f1khgbig03huj ... -stock.bin603 (for older 1/2mb ecu), link-
https://www.dropbox.com/s/hk5l5qvxanth0 ... k.bin?dl=0603 (for 2005), link-
https://www.dropbox.com/s/v1zk1r125bzru ... k.bin?dl=0806, link-
https://www.dropbox.com/s/ia7n1um3aqat0 ... k.bin?dl=0808, link-
https://www.dropbox.com/s/19b5485mpe7d0 ... -stock.bin809, link-
https://www.dropbox.com/s/ex112dpo9n5vd ... -stock.bin811, link-
https://www.dropbox.com/s/iiqmcka4l0le3 ... -stock.bin812, link-
https://www.dropbox.com/s/lpi848e63cjrt ... -stock.bin813, link-
https://www.dropbox.com/s/k37udcgisy6sz ... k.Bin?dl=0035, link-
https://www.dropbox.com/s/litn425rppc4q ... k.Bin?dl=0704 (WJ, 1/2mb ecu), link-
https://www.dropbox.com/s/ulkck2z1s47nh ... k.bin?dl=0*-this binary was taken from a vehicle with a standard transmission
-afaik, files contain maps for both types of transmission which is selected by the TCU requirement,
but just playing it safe until a 525 automatic bin comes my way.
Need the software for MPPS V13.02:
link-
viewtopic.php?f=98&t=78418&p=932054#p932054This post will be updated as needed.