It is currently Sun Apr 12, 2026 3:50 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: another lift question
PostPosted: Sun Aug 17, 2014 9:41 pm 
Offline
LOST Newbie

Joined: Fri Aug 10, 2012 9:22 pm
Posts: 4
Hi everyone,
Ok so I know the lift questions are beat to death, i have the money saved up to get it and the wife is all for it. I am deciding between the Frankenlift and the tommudd econo lift, i have heard good things about both, although not nearly as much about the tommudd lift. My question is can i change the springs or paint them in the tommudd lift, or just get the franky and buy the uca's from jba, but that route will cost more and not as much lift but the wife and I both want everything to match. Also the fact that i dont have to assemble the front struts is a nice bonus. So what would yall do?

_________________
2005 white jeep liberty sport 4x4 gasser, cut front bumper, front d-rings, rear shelf, 245/70/16 grabber AT2's, more to come soon


Top
 Profile  
 
 Post subject: Re: another lift question
PostPosted: Sun Aug 17, 2014 10:21 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
What springs do you think you want?
Of course you can paint the springs any color you want.
Not hard to take the springs somewhere to have them compressed

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: another lift question
PostPosted: Sun Aug 17, 2014 10:28 pm 
Offline
LOST Newbie

Joined: Fri Aug 10, 2012 9:22 pm
Posts: 4
Thanks tom for responding. The springs aren't that big of a concern for me as I know both the ome and Iron man springs are great. I was just not sure if the paint would hold up long term. And how much is it usually to have the springs done as I don't really have any contacts in that area. Also why is it that all the info I find on the econo lift is mostly for the Kk does that info apply to ours also?

_________________
2005 white jeep liberty sport 4x4 gasser, cut front bumper, front d-rings, rear shelf, 245/70/16 grabber AT2's, more to come soon


Top
 Profile  
 
 Post subject: Re: another lift question
PostPosted: Sun Aug 17, 2014 10:32 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
Dieseljunkie88 wrote:
Thanks tom for responding. The springs aren't that big of a concern for me as I know both the ome and Iron man springs are great. I was just not sure if the paint would hold up long term. And how much is it usually to have the springs done as I don't really have any contacts in that area. Also why is it that all the info I find on the econo lift is mostly for the Kk does that info apply to ours also?

Should be able to find a shop that will compress the springs for 25/30 bucks per side or maybe less
The front spring/shock setup is the same for the KJs and KKs
Only difference between KJs and KKs is basically the UCAs and rear springs

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: another lift question
PostPosted: Sun Aug 17, 2014 10:41 pm 
Offline
LOST Newbie

Joined: Fri Aug 10, 2012 9:22 pm
Posts: 4
Ok well thank you for your help I will be ordering Friday!! Can't wait now it would be nice to see some other white kj's lol very elusive

_________________
2005 white jeep liberty sport 4x4 gasser, cut front bumper, front d-rings, rear shelf, 245/70/16 grabber AT2's, more to come soon


Top
 Profile  
 
 Post subject: Re: another lift question
PostPosted: Sun Aug 17, 2014 11:41 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
You want to see white KJs lifted ?
How about Buggins ( local member) with 3 inch and 245-70-16s
Image
Image

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: another lift question
PostPosted: Sun Aug 17, 2014 11:49 pm 
Offline
LOST Newbie

Joined: Fri Aug 10, 2012 9:22 pm
Posts: 4
Thats awesome! I don't really see any white ones lifted, it's nice to know what mine might look like when it's done. Thank you tom you have givin me more inspiration than you think thank you.

_________________
2005 white jeep liberty sport 4x4 gasser, cut front bumper, front d-rings, rear shelf, 245/70/16 grabber AT2's, more to come soon


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 51 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com