What is the best quality part or fix for the rear CV on the front drive shaft. I did mine with
http://www.driveshaftparts.com/index.ph ... arch=me807
In December - 6 months and about 7000 miles ago and it is loose already.
Edit The joint looks good
I just grabbed it, wiggled it and it clunked on the transfer case end.
Any suggestions for a permanent fix for the front drive shaft?
I was going to pull the drive shaft. When I got under there the replacement part looked good.
I took the driveshaft off this morning and confirmed that the rattle was from the rear joint that I rebuilt. going to send for another rebuild kit. It should be under warranty.
I'll have to see how their warranty works out. Hopefully they just send another unit.
It does not make a noticeable noise When driving - but we are half deaf and don't need to turn up the radio to hide noise. Our conversations normally involve saying What? a lot
It was a vibration I could feel in the seat that made me check originally. I just reached under, grabbed the driveshaft and felt movement
I saw a little grease on the floor pan above the rear joint that I changed. I am guessing now that maybe that was a little excess, because the boot looks good and the joint seems good - But it wasn't There was slop every direction in the joint once I got the driveshaft off.
Thanks
I got in touch with driveshaft parts and they sent a replacement. I hope it lasts longer than the first one did