Hello, trying to fix light for gear shifter bezel area.
Ligt comes on or not ramdomly.
Does the bezel just pull off then what?
Before I break it wanted to ask.
Thanks, layback

_________________
2006 Liberty CRD limited Silver following 108K, timing belt, water pump, thermostat, 7v steel glow plugs
GDE FT, ATF, Fumoto, Front, rear, transfer box fluid, Weeks, Fia grill cover, Mishmoto
Hayden, Oem 11 blade nylon fan, V6 airbox, Weathertech, Stampede Visors, deflectors
Cooper CTS 225/75 R16 Smittybilt brush guard & rear light guards

See rockymountain's pose at viewtopic.php?f=3&t=59788 . It's for an 04 but should be the same for 05 and 06. From his writeup I suspect the bezel is much like the one around the radio and can be popped up using a thin flexible putty knife or some such tool.

_________________
Sold to LOST member my 05 Ltd, GDE Stg II turbo + TCM tune, SunCoast TC w. Transgo kit, Steiger window regulators, Samcos, Fumoto valve, 2nd gen filter head with Lub. Spec. bleeder, Hayden clutch & 11 blade fan, inverted spare, P-1 battery, BF Goodrich Long Trail TAs, Etecno1 glow plugs, timing belt at 50K miles/8 yrs

Thanks, gonna pop if off tonight.

layback

_________________
2006 Liberty CRD limited Silver following 108K, timing belt, water pump, thermostat, 7v steel glow plugs
GDE FT, ATF, Fumoto, Front, rear, transfer box fluid, Weeks, Fia grill cover, Mishmoto
Hayden, Oem 11 blade nylon fan, V6 airbox, Weathertech, Stampede Visors, deflectors
Cooper CTS 225/75 R16 Smittybilt brush guard & rear light guards

If anyone done this please share, took off bezel have
not found were the light is supposed to be.

Any help or pictures thanks a bunch.

Layback

_________________
2006 Liberty CRD limited Silver following 108K, timing belt, water pump, thermostat, 7v steel glow plugs
GDE FT, ATF, Fumoto, Front, rear, transfer box fluid, Weeks, Fia grill cover, Mishmoto
Hayden, Oem 11 blade nylon fan, V6 airbox, Weathertech, Stampede Visors, deflectors
Cooper CTS 225/75 R16 Smittybilt brush guard & rear light guards