Hello, I have an arb bumber which I had purchased on my 03 kj. I no longer have my 03 but recently purchased and 06 kj crd. Will the bumber fit on the 06?
Before I try to install it is like to know if anyone knows. Because when I go to the sites which sell them, they have the option for either 02-04 or 05-07 which makes me hesitant to start the install. Thank you ahead of time for any useful info.

They are different, but you can make it fit, just looks very bad and dosent look right.

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.

Yep ^^^^^^^
grills are different so throws everything off
I would try and sell the one and then go from there

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited

Thank you guys for the info. Now to try and sell.

Wait!!!!!!!

I put an 06 grill on my 04, bezel and all. Maybe it will work in reverse?

Goto the wreckers, if there is one nearby, and see if they have both generations, swap the parts over and see if they fit

if it works, you will have four dogs instead of two, woot woot.

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --

If you're serious about selling I'm very interested. Send me a PM if you'd like to work out a deal.

Bob

_________________
2003 Liberty
- 3.7L V6, NP242 SelecTrac Transfer Case
- OME 927/948's, Bilsteins, JBA Gen 4.5 A-arms, JBA 1/4" top plate, 3-ring clevis, 2 extra rear isos
- Rubicon Moabs
- 4.10's, 265/70-16 Goodyear Duratracs
- 4X Guard Trans Skid, Modded BoulderBars, Mopar Engine, T-Case, Tank Skids, ARB bumper, Smittybilt 9500XRC winch