It is currently Fri Sep 26, 2025 6:58 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Wait is Over
PostPosted: Thu Jun 11, 2015 7:56 am 
Offline
LOST Member

Joined: Wed Jan 14, 2015 7:09 pm
Posts: 115
Location: North Arkansas
OK, so after 7 weeks of waiting the shop I hired to install my O'Reilly Auto Parts crate 4.2 called that it's done. I'm in the auto repair/tire business, but don't do major repairs and this guy came highly recommended by both my Oreilly store manager, a friend who's been building trannies since the 70's, and a friend who's closing his shop to raise chickens (bbbaaaaadd move in my mind).

Now my $2,500. Liberty has a $2,800. engine and $900 in labor. :BINGO: Sure ran well on the 20mile trip home.

Time to start planning the other stuff, lift, bumpers, roof rack, rock guards, et al,,,,,,,

Bob


Top
 Profile  
 
 Post subject: Re: Wait is Over
PostPosted: Thu Jun 11, 2015 8:25 am 
Offline
LOST Junkie

Joined: Sun Jan 26, 2014 7:10 am
Posts: 569
Location: Whitby, Ontario
You gots a V8 ? Woo woot!

_________________
2004 KJ 3.7 Limited:
IRO WJ Upper Arm -- WJ Rear LCA's -- Rear Driveshaft Spacer -- JBA Upper A Arms -- 4 inch Lift -- 265/75/16 4" B/S -- WasherBottle Relocate -- Custom High Mount Intake -- Carpet Delete -- Homebrew Winch Bumper -- Warn VR8000 -- Homemade Plow -- Pinch Weld POUNDED -- POR 15 inner fenders --


Top
 Profile  
 
 Post subject: Re: Wait is Over
PostPosted: Thu Jun 11, 2015 9:30 am 
Offline
LOST Newbie

Joined: Sat Jan 24, 2015 4:45 am
Posts: 96
Could you post the engine stats/ a link to it, i couldn't find any crate engines on the website


Top
 Profile  
 
 Post subject: Re: Wait is Over
PostPosted: Thu Jun 11, 2015 3:15 pm 
Offline
Lifetime Member
Lifetime Member

Joined: Tue Jul 05, 2005 8:23 am
Posts: 3544
Location: New Braunfels, Texas
4.2 L I6 Vortec???

or Ford 4.2L V6???

or ??? a converted Mercury 4.2L Diesel... :pepper: :BANANA: would be killer

_________________
Founder of L.O.S.T.
2006 CRD Sport

Mods: GDE Hot Tune w/ 364#@2000rpm/Air Box /3" Str8 Exhaust/ASFIR Alum Skids/245-75R-16 Cooper STT PRO/OME LIFT w/Clevis & 4 Spring Isos/AirTabs/Rigid 10" S2 LED/4xGuard Ctr Matrix Bumper
Drag Strip:Reac=.1078_60ft=2.224_1/8=10.39@64.8mph_1/4+16.46@80.8mph


Top
 Profile  
 
 Post subject: Re: Wait is Over
PostPosted: Thu Jun 11, 2015 3:21 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jun 04, 2013 1:21 pm
Posts: 2137
Location: Utah
DarbyWalters wrote:
4.2 L I6 Vortec???

or Ford 4.2L V6???

or ??? a converted Mercury 4.2L Diesel... :pepper: :BANANA: would be killer


If were gunna start swapping brands, why not a 5.3L or 6.0 GM V8. Those fit in anything.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs


Top
 Profile  
 
 Post subject: Re: Wait is Over
PostPosted: Thu Jun 11, 2015 4:14 pm 
Offline
LOST Addict

Joined: Thu Jul 16, 2009 11:34 am
Posts: 1236
Or why not a Ford 427 DOHC??

_________________
2002 KJ Limited 3.7, 5.25" lift via coilovers, custom HD rear springs, 32.2" tires on moabs (soon 33s) 4.56/JBA diff, OX lockers front/rear, NP241OR, Parker Fab front/rear bumpers, rock rails and roof rack, Viair OBA.

2006 KJ sport 3.7, 4" Ironman lift, 32" tires, Parker Fab front/rear bumpers and rock rails.


Top
 Profile  
 
 Post subject: Re: Wait is Over
PostPosted: Thu Jun 11, 2015 5:39 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jun 04, 2013 1:21 pm
Posts: 2137
Location: Utah
4x4kayak2112 wrote:
Or why not a Ford 427 DOHC??


:-)r

But seriously, the GM LS blocks are like the size of my weed wacker motor. I've seem people put them in motorcycles, no joke.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs


Top
 Profile  
 
 Post subject: Re: Wait is Over
PostPosted: Thu Jun 11, 2015 6:34 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
You mean O'Reilly Auto Parts sells more than chrome exhaust tips and wax?
Interesting............
Even more interesting is what motor was installed

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Wait is Over
PostPosted: Thu Jun 11, 2015 11:02 pm 
Offline
LOST Member

Joined: Wed Jan 14, 2015 7:09 pm
Posts: 115
Location: North Arkansas
Sorry, should have checked back in sooner. My distraction has led to quite a lot of confusion, evidently. Engine is a direct replacement, OE type 3.7. Expect a bit of derision, being a career automotive repair 60 year old. :oops:

So far, so good! Starts, runs, sounds great. Yes, O'Reilly is, I guess the best parts outlet I've ever used, could have something to do with the local store having an involved manager who was the "resale manager" for years before taking full managerial position. Now he has a "kid", approx 24, as resale contact person who's doing a great job also. Rest assured, there are more people in parts stores who's best talent is keeping the counter from floating off the floor. :roll:

Even at that, they'll all do to watch. When I first realized old motor was fubar I called for a price and my "buddy" came up with $3,1xx.xx. I said "you mean 3 grand even?", "yea, I suppose so. Approximately 4 months later when I had sold some odds and ends and ratholed enough to pay for it I called back; "Hey Eric, remember that engine you priced me for my Jeep?" "Sorta, are you finally ready?" "Yea, you remember pricing it at $2,800?" "NO, but if that's what I said,,,," "Yep, get her ordered". Wiley buggers on both sides of the counter.

Bob


Top
 Profile  
 
 Post subject: Re: Wait is Over
PostPosted: Thu Jun 11, 2015 11:34 pm 
Offline
Moderator / Lifetime Member
Moderator / Lifetime Member

Joined: Thu Jul 07, 2005 5:49 pm
Posts: 27226
Location: NOW Southeastern Ohio/ Tanzania
:lol: :lol: There ya go, good deal!

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited


Top
 Profile  
 
 Post subject: Re: Wait is Over
PostPosted: Sat Jun 13, 2015 9:38 am 
Offline
LOST Member

Joined: Wed Jan 14, 2015 7:09 pm
Posts: 115
Location: North Arkansas
Left it at a local (hick) dealer to have 2 keys and a "fob" programmed when they get a chance to "slip it in a crack" in their work schedule.

Bob


Sent from my iPad using Tapatalk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com