what do you call it

Kj Juice · **Joined:** Sat Oct 15, 2005 5:35 pm **Posts:** 62

i broke the connector to my fog lights and i can not find a replacement.. i dont know if i am typing in the wrong name or what. all i can find is the light housing and the light kit.. not just the connector and wire. i have checked the salavge yards in my area and i can't even find a liberty.. help me please

2006KJSPORT4x4 · **Posted:** Wed May 17, 2006 10:20 am

have you tried a search for wiring harness or something like that perhaps...i'm afraid it might be an all or none thing....you get the fog lamp and the cables and whatnot together and not seperate...

sleeve84028 · **Posted:** Wed May 17, 2006 11:07 am

What side of the connector did you break?

The vehicle side = the entire lenght of harness from the light switch to the fog light
-or-
The light side = replace the entire light fixture or possibly the harness itself

Kj Juice · **Joined:** Sat Oct 15, 2005 5:35 pm **Posts:** 62

the acutal connector that goes on to the light prongs. if that makes sense

Guyute1210 · **Posted:** Wed May 17, 2006 11:57 am

Post a pic of what is broke...

Boi1ermaker · **Joined:** Tue Jan 24, 2006 1:44 pm **Posts:** 249

i found a harness from chrysler parts direct, part number 82205247. The connectors didn't match up with the rocky mountain edition fog lights i bought. I ended up cutting the ends off both the lights and the harness and splicing them together. If you post a picture and whichever end is broken may match something i saved. i'd be happy to send a connector to you if you want to take a shot at splicing a new end on.

gopherbeats · **Posted:** Wed May 17, 2006 1:47 pm

Boi1ermaker wrote:

The connectors didn't match up with the rocky mountain edition fog lights i bought. I ended up cutting the ends off both the lights and the harness and splicing them together.

I would just splice and solder them.. then you do not have to waste your time trying to find a part that may not fit anyway

Kj Juice · **Joined:** Sat Oct 15, 2005 5:35 pm **Posts:** 62

ok sorry it took so long. not having a dig camera hurts.

that is the piece if you can see the black wire has some corrasion. would that cause it not to work.. the other side works fine. but just not that one and yes i tried replacing the bulbs.. any help

Jeepjeepster · **Posted:** Thu May 25, 2006 8:37 pm

I do not see anything wrong in that pic? Looks like you need to cover those wires with black tape if you would like? Is that what you are talking about?

Or did you break one of the tabs ON the connector?

n3qik · **Posted:** Thu May 25, 2006 8:57 pm

If it is for a 05, then this is what you need. If so, PM me your address and I will sent it to you free of charge.

Kj Juice · **Joined:** Sat Oct 15, 2005 5:35 pm **Posts:** 62

that is the piece i need.. i think mine is just fried from getting in a bunch of water

Boi1ermaker · **Joined:** Tue Jan 24, 2006 1:44 pm **Posts:** 249

i believe i've cut off that same connector i'll have to dig up my box of parts to make sure. if anybody else has the same problem, i've got two more in a box somewhere if anybody else need them.

KJ02 · **Posted:** Fri May 26, 2006 12:45 pm

I bought mine at Pep-Boys

n3qik · **Posted:** Fri May 26, 2006 8:09 pm

Kj Juice wrote:

that is the piece i need.. i think mine is just fried from getting in a bunch of water

Got your PM, will mail it on Tuesday. Glad to help someone out.

n3qik · **Posted:** Wed May 31, 2006 10:31 pm

It's in the mail, should get there by lets say Xmas??

Kj Juice · **Joined:** Sat Oct 15, 2005 5:35 pm **Posts:** 62

thanks again. got it today.. hooked it up and magically the light works.. thanks again.. you sure you dont want some money for it

n3qik · **Posted:** Fri Jun 02, 2006 6:37 pm

Nope, would have sat on the shelf till hell froze over.

what do you call it

Who is online