Hi guys,

I have a 09 KK 76,000 miles

I'm looking to do an oil change, MAP clean, MAF clean and a transmission fluid change in the coming weeks.

Not being very mechanical I'm looking to get familiar with the engine etc, I have fortunately got a family member who I'm hoping will lend a hand on a couple of things but would like to tackle most of it myself,

I'm not 100 where everything is in relation to the engine so hoping someone can point me in the correct directions, almost like a dummies guide to an engine for a dummy

I have seen a guide but for an earlier model of kk which helped me understand why to do them but doesn't help me know where they are

This in my engine bay, I know the obvious ones, brake fluid, coolant, oil (under cover) air filter, which has a sensor? MAF?





I'm hoping someone can show me the way and lend a hand

Cheers


Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

Here are a couple of other picture I have taken to help you to help me out in locating certain things that I'm looking for

Also can someone identify these two for me




Sent from my iPhone using Tapatalk


Sent from my iPhone using Tapatalk

I guess you are in the UK? You wont find much info here on your CRD. Yours is the newer version of the VM 2.8 its not available in the US as far as I know.

_________________
2005 KJ RENAGADE 2.8 CRD 6 SPEED NP242 FULLTIME 4X4

yeah about time somebody show up ,, we needed your help . we had a guy in dominican rep , with starting issue, so we where trying to help him , any way he fixed his problem with coolant sensor replacement. so lets help each other , if you need info on US model we help you and if we need help with europe specs crd you help us , LOL

Good it got it fixed, Sometimes you over look the simplest of things, but than we are all human. well most lol

_________________
2005 KJ RENAGADE 2.8 CRD 6 SPEED NP242 FULLTIME 4X4

im confused


Sent from my iPhone using Tapatalk

The green cap on the end of the hose is just a breather. Probably for the front diff. The black cap, I am unsure, can not read it in the pic.

lol on confusing ,, I'm guessing that black cap is possibly , A/C high pressure port , if you need to check your A\C system pressure and hook up gauges. and again we don't have same engine in our jeeps , not available in north america , and our friend that i mentioned he is in south america he has same engine as yours. if you are in europe , you should be abele to find somebody to answer your questions I'm sure there is plenty of them on the road over there,

The sensor with the red tab in the first picture is the maf. The sensor just below it on the side of the air box is an ambient pressure sensor, or at least it is on our KJ crds. I don't see the MAP sensor in any pics you sent but on our KJ it's toward the back of the intake manifold on the right side(looking from the front of the car).

Edit: now that I'm looking, that black plug just below the green breather in the last picture looks like it may be for the MAP sensor. I would check there.

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs