Can anyone confirm the layout and part number of the flex plate bolts? It looks like there are eight into the hub and eight out to the torque converter, but it's tough to tell. The local dealer clearly doesn't know what they're talking about as we got side tracked on the reluctor wheel fasteners, and the guy didn't know what a reluctor wheel was, so....

I can't tell the difference between 05014969AA and 05066753AA in the parts diagram, but it seems like one of those is the right one. I'm looking here:

http://www.factorychryslerparts.com/sho ... ct=4305102

05066753AA (24 in diagram) you need 8 and they bolt the hub to the crankshaft.

05014969AA (22 in diagram) you need 8 and they bolt the flexplate to the hub

Hope this helps

_________________
2006 Jeep Liberty CRD Limited - Rebuilt at 145K
GDE Eco Tune
Weeks 1+2
ARP Studs
New rockers + Valves
New #1 pistion and all connecting rods
New Crankshaft
Carter In-Tank Pump

That's what I thought, and that's what I need - thanks!

Inexplicably that latter part number is scarce - none in California, 1 or 2 in any given place on the west coast. What the heck?