It is currently Thu Mar 28, 2024 5:08 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Crank Position Sensor Heat Shield 2.8 crd
PostPosted: Mon Apr 10, 2017 5:16 am 
Offline
LOST Newbie

Joined: Mon Apr 10, 2017 4:44 am
Posts: 1
Just replaced the CPS on my 2005 2.8CRD, solved the weird problem of engine stopping but I noticed that when I took it off says in the forum that there should have been a heat shield by the turbo to remove, there was no heat shield. My question is if there is no heat shield could the new CPS be effected, if so where can I get a new one and is there a specific id number for the heat shield?


Top
 Profile  
 
 Post subject: Re: Crank Position Sensor Heat Shield 2.8 crd
PostPosted: Mon Apr 10, 2017 8:37 am 
Offline
LOST Newbie

Joined: Sun Mar 27, 2016 11:23 am
Posts: 38
Location: Rolla, Missouri
Try this link.

viewtopic.php?f=5&t=80849&p=906009&hilit=heat+shield#p906009

_________________
2005 KJ CRD 2.8L Liberty Ltd.

151K mi. 04/19
F37 w/no shudder
2nd gen filter head
SAMCO Silicone Turbo Hoses
Airtex E7181M Lift pump/Sasquatch plug-and-play harness
https://shop.sasquatchparts.com/
MANN ProVent 200
Weeks stage 1&2
GDE ECO Tune by Green Diesel Engineering
OME 2" lift/Bilstein shocks
IRO rear UCA w/WWDiesel Bracket


Top
 Profile  
 
 Post subject: Re: Crank Position Sensor Heat Shield 2.8 crd
PostPosted: Mon Apr 10, 2017 1:58 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
Baum wrote:
Just replaced the CPS on my 2005 2.8CRD, solved the weird problem of engine stopping but I noticed that when I took it off says in the forum that there should have been a heat shield by the turbo to remove, there was no heat shield. My question is if there is no heat shield could the new CPS be effected, if so where can I get a new one and is there a specific id number for the heat shield?

I have not been able to find the Mopar Part no. for this heat shield! :roll:

If anyone has a Mopar part no. for it, please post.

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Crank Position Sensor Heat Shield 2.8 crd
PostPosted: Mon Apr 10, 2017 5:33 pm 
Offline
LOST Addict
User avatar

Joined: Sat Aug 27, 2016 9:12 pm
Posts: 2505
Location: Oregon Coast Dairy Country. Land of stumps, dumps, and "Liquid Pumps"
Try sending an email to this guy. He was parting out a couple of liberty crd's in February. He might still have that piece.

dieseldisciple@gmail.com

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770


Top
 Profile  
 
 Post subject: Re: Crank Position Sensor Heat Shield 2.8 crd
PostPosted: Thu Jun 28, 2018 4:12 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Oct 20, 2008 12:24 pm
Posts: 977
Location: Victoria, Canada
WWDiesel wrote:
I have not been able to find the Mopar Part no. for this heat shield! :roll:

If anyone has a Mopar part no. for it, please post.

53013753AB


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com