turblediesel wrote:
Mine leaks a little too. I believe they use a fuel line tool to uniformly press back tiny fingers to disconnect. Seals with an o-ring. Haven't messed with it yet.
The quick disconnects are no big deal. Just use a pick to pop off the clip and pull the line out. I'm curious if the fitting in the cooler just unscrews or if it is permanently mounted.
Update: The cooler fitting just unscrews and is sealed by an o-ring. My fitting was loose. It unscrewed by hand. I snugged it and think this was the culprit. Time will tell.
_________________
2006 Jeep Liberty CRD LimitedGen2 Fuel Head - Magnaflow Exhaust - Ram transmission swap - In-Tank Lift Pump
Moab Wheels - 245/75/R16 LR E Cooper Discoverer AT3 Tires - OME Lift 790/90009 948/60069 - Etecno Glow Plugs - V6 Airbox
RUNNING B100Pic of my Jeep!