iceaxe1967 wrote:
I have never been happy with my lifted CRD and I am about to pull it all off for stock height.
Gone thru 3 and about to be my 4th rear upper control arm and the 2nd set of ball joints. The lift has been on less than 2 years.
It was definitely not a bolt on affair like all my other jeeps.
You need this for the rear!
I have available the mount to allow the Iron Rock Rear Upper Control Arm for the WJ to be bolted and fitted to the Jeep Liberty rear axle with no modifications.
The Iron Rock control arm is super strong and fully adjustable and allows for more flexibility of the rear axle when lifted without things getting into a bind.
The bushings and single ball joint are all replaceable along with the ball joint having a serviceable grease fitting.
https://www.ironrockoffroad.com/product ... short.htmlPM me if interested.
See these threads>
viewtopic.php?f=98&t=87801viewtopic.php?t=87307
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve