It is currently Thu Mar 28, 2024 6:45 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 74 posts ]  Go to page Previous  1, 2, 3, 4  Next
Author Message
 Post subject: Re: Time for a build M1101!!!
PostPosted: Thu Aug 25, 2016 12:41 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Mar 31, 2009 4:03 am
Posts: 1503
Location: S.W Washington
All the rest are OK. It's just the last 2 that are not showing.

_________________
07 KA Light Khaki, Manual trany.
2.5" Adjust-A-Strut JBA lift, Euro taillights,
Home made; Front Tilt Hood, Roof Rack, RAM Air, & CAI.
ESP Off Switch
Take a ride on the Trō side!

Image


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Fri Aug 26, 2016 1:04 am 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
PALiftedKK wrote:
Added mud flaps a few weeks back. They mainly were added for looks as there is not any half decent mounting spot for a cross brace for the flap to moint to so i just mounted it to the wheel well.

On a side note, I got a far better job that will pay the jeep bills and then some so just got to wait for those few paychecks and be smart about payments for the trailer. Cause its extremely expensive...


Anyways,

Image

Image


fixed

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Fri Aug 26, 2016 6:04 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Tue Mar 31, 2009 4:03 am
Posts: 1503
Location: S.W Washington
Sweet! I've been following this thread from the beginning. Not much to add to it myself, but I really enjoy the process/build you have been doing.
Half the fun is seeing the Pics as you go!

_________________
07 KA Light Khaki, Manual trany.
2.5" Adjust-A-Strut JBA lift, Euro taillights,
Home made; Front Tilt Hood, Roof Rack, RAM Air, & CAI.
ESP Off Switch
Take a ride on the Trō side!

Image


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Sat Aug 27, 2016 1:03 am 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
Scar0 wrote:
Sweet! I've been following this thread from the beginning. Not much to add to it myself, but I really enjoy the process/build you have been doing.
Half the fun is seeing the Pics as you go!



Thanks! I wish I had more time and money to complete the trailer with. The trailer is quite expensive and I have no intention on starting it untill I have most of the funding since most of the cost is to the frame and tent. The trailer is built heavy duty and I'd like to modify it to last just as long as schutt intended.

Next up, maybe an electric over hydrolic for the brakes!

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Sat Aug 27, 2016 10:43 am 
Offline
LOST Addict
User avatar

Joined: Sun Oct 23, 2011 7:32 am
Posts: 3100
Location: Philadelphia, PA
Scar0 wrote:
Sweet! I've been following this thread from the beginning. Not much to add to it myself, but I really enjoy the process/build you have been doing.
Half the fun is seeing the Pics as you go!

X2! Couldn't agree more! Thanks for continuing to post pics of your progress, PA. Military trailers are cool. Jeep adventure trailers are cool. You hit the sweet spot by combining the two!

_________________
2008 Liberty Sport 4x4 Automatic
Image
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack

M116A3 Trailer build thread: viewtopic.php?f=72&t=77997


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Thu Feb 02, 2017 11:29 am 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
Been a while since the last progress on the trailer. I am in the process of ordering an argon cylinder and a tig welder. Still figureing out the type of aluminum square tubing I want but I could figure that out in a few more weeks time as when it gets closer to my home time from driving the truck. The welder comes in stock next week so im crossing my fingers I can have it by the time I get home. Its soo exciting to finally get this show on the road!!!

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Thu Feb 02, 2017 8:37 pm 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
Not even 12 hours later, confirmed I was able to get the welder before March. Wallet seems lighter now.

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Thu Feb 16, 2017 2:55 pm 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
Getting the metal ordered soon. Only thing at the moment I am dead set on with metal is the diamond plate for covering the tub. Going with 1/8". 3/16" is prefered but my pocket simply can not afford that. I will add more bracing since the square tube is cheeper to use then going thicker diamond plate. I am very "iffy" with the vertical square tube being that I only want 4 vertical supports and needs to support a maximum of 650 lbs.

Wish me luck!

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Sat Feb 18, 2017 12:09 am 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
Time to get this show (quite literally) on the road!!!

Image

Check out that last item too! 4 of them to raise the tent more then 7' off the ground. Hope the tent ladder can extend that distance...

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Sat Feb 18, 2017 12:46 am 
Offline
LOST Addict
User avatar

Joined: Sun Oct 23, 2011 7:32 am
Posts: 3100
Location: Philadelphia, PA
Still following and looking forward to updates!

I can't seem to see the photo in your last post. What was it of?

_________________
2008 Liberty Sport 4x4 Automatic
Image
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack

M116A3 Trailer build thread: viewtopic.php?f=72&t=77997


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Sat Feb 18, 2017 10:01 am 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
lfhoward wrote:
Still following and looking forward to updates!

I can't seem to see the photo in your last post. What was it of?


Seems like google has changed there upload and sharing parameters...

Image

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Mon Mar 06, 2017 3:00 pm 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
Got the trailer mostly welded up. Going to HOPEFULLY finish the welds and complete the tent frame by the end of the week.

Image

Just incase the picture doesnt show up.... let me know if it doesn't show

https://lh3.googleusercontent.com/-2PXdqVILrg0/WL2uhtcFW0I/AAAAAAAAEVs/LnO-LcT-vvg2qP82-_KQ8uI1HmpJr_QoQCJoC/w1060-h596-p-rw/17%2B-%2B1

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Mon Mar 06, 2017 5:00 pm 
Offline
LOST Addict
User avatar

Joined: Sun Oct 23, 2011 7:32 am
Posts: 3100
Location: Philadelphia, PA
Sorry, but it doesn't show.

_________________
2008 Liberty Sport 4x4 Automatic
Image
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack

M116A3 Trailer build thread: viewtopic.php?f=72&t=77997


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Mon Mar 06, 2017 5:49 pm 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
Fixed???

Image

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Mon Mar 06, 2017 6:00 pm 
Offline
LOST Addict
User avatar

Joined: Sun Oct 23, 2011 7:32 am
Posts: 3100
Location: Philadelphia, PA
No, but now the word "Image" shows up where the photo is supposed to be.

_________________
2008 Liberty Sport 4x4 Automatic
Image
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack

M116A3 Trailer build thread: viewtopic.php?f=72&t=77997


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Mon Mar 06, 2017 8:07 pm 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
Finally fixed it...

I need to grab an argon tank asap. That's all I am currently waiting on.

Image

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Fri Mar 24, 2017 10:20 pm 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
Well I'll be home Monday and Tuesday for the trailer. Don't know how far I will get with the welds. Im confident in my welds but I still need to dial in the argon flow and cleaning percentage. Welding aluminum isn't so easy especially to a first time welder like myself.

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Wed May 16, 2018 4:48 pm 
Offline
LOST Addict

Joined: Fri Nov 07, 2014 9:15 am
Posts: 1439
Location: Pennsylvania
It has been quite some time since my last progress on my trailer... well not any more!!!

Image

Image

Image

Image

Image


I got the tent in this past Friday and will be getting the tent frame and actuator mounts mounted and welded up. Electrical was run but for some reason I can’t post that photo up... I still have a lot of work ahead of me but at least I can tell it’s an overland camper trailer after this weekend! Stay tuned y’all!!!

_________________
2012 Jeep Liberty KK 109k miles and stong
4" lift.
Gen 5.5 A-Arms
Maxxis 31x10.50x15

ATS42rle


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Wed May 16, 2018 5:27 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
Looking Good! :wink:
How much does that thing weigh? Looks super stout!

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Time for a build M1101!!!
PostPosted: Wed May 16, 2018 6:19 pm 
Offline
LOST Addict
User avatar

Joined: Sun Oct 23, 2011 7:32 am
Posts: 3100
Location: Philadelphia, PA
That’s awesome!! Will there be crossbars at the top of the corner posts to support the tent? Or will the tent go on the aluminum decking? Either way, super sweet build!

_________________
2008 Liberty Sport 4x4 Automatic
Image
Jeepin By Al 4" Lift Kit
BFG KO2’s 245/75R16
Full MOPAR skid plates
Rock Lizard Skink Super Sliders
AtTheHelm Front Recovery System & Roof Rack

M116A3 Trailer build thread: viewtopic.php?f=72&t=77997


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 74 posts ]  Go to page Previous  1, 2, 3, 4  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com