So in my haste, I read through the description of this Litens' OAD Pulley, saw "Chrysler/Dodge/Jeep" and ordered it:
https://shop.advanceautoparts.com/p/litens-overrunning-alternator-decoupling-oad-pulley-original-equipment-quality-920810a/10150690-P?cm_mmc=ET-_-Trans-_-Shipped-_-General#utm_source=et&utm_medium=trans&utm_campaign=shipped&utm_content=generalPRODUCT DETAILS
Part No.920810A
Warranty Details (1 YR REPLACEMENT IF DEFECTIVE)
Litens Automotive is the original equipment supplier to Chrysler/Dodge/Jeep for this decoupling alternator pulley. This replacement pulley is also designed and produced by Litens and is exact in all form, fit, and performance characteristics as the original equipment part (with the exception of not having the car manufacturer's logo or part number applied to the part). Decoupling pulleys are engine specific and should not be interchanged with other types of pulley technology. The Litens OAD type pulley is designed to free-wheel in one direction and, with an internal spring and damping device, softly engage in the opposite direction. The OAD is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component as well as the alternator. The correct decoupler pulley ensures smooth, quiet performance as well as increasing vehicle gas mileage. Under normal driving conditions, the original pulley will require replacement in approx. 45,000 - 75,000 miles.
Product Features:
Patented Original Equipment Design
Protects the alternator and other front-end accessory drive components.
Installation instructions included.
New plastic cap included with the OAD.
Tools Required - Litens recommends using an impact gun with a 17mm hex driver bit such as Snap-On P/N CPT110A
Professional mechanics can install this replacement OAD in approximately 2 hours. During alternator replacement, belts, tensioners, and routing pulleys should be inspected.
53mm O.D.; 17mm I.D.; 49mm width; 6-Grooved running surface ; High-grade steel construction. 17mm Hex bit driver Included for ease of installation.
SPECIFICATIONS
Cap Included: Yes
Clutching Technology: Litens OAD
Color: Black
Instructions Included: Yes
Pulley Groove Quantity: 6
Pulley Inside Diameter: 17 mm
Pulley Lip Diameter: 57 mm
Pulley Material: Steel
Pulley Outside Diameter: 53 mm
Pulley Width: 49 mm
Required Tools: 17mm Hex Driver Bit
Width: 49 mm
Should it have been the other one? Part No.920834A?
https://shop.advanceautoparts.com/p/litens-overrunning-alternator-decoupling-oad-pulley-original-equipment-quality-920834a/10150692-P?fref=gc&dti=255347647845328PRODUCT DETAILS
Part No.920834A
Warranty Details (1 YR REPLACEMENT IF DEFECTIVE)
Litens Automotive is the original equipment supplier for this decoupling alternator pulley to both Chrysler and Toyota. The Litens aftermarket replacement part uses the latest design technology used in the Toyota part, so while maintaining the exact Toyota form, may look different than the Chrysler part being replaced. Therefore the Chrysler part performance is improved versus the original equipment part. The Toyota part maintains the exact form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer's logo or part number applied to the part). Decoupling pulleys are engine specific and can not be interchanged with other types of pulley technology. The Litens OAD type pulley is designed to free-wheel in one direction and, with an internal spring and damping device, softly engage in the opposite direction. The OAD is designed as a sacrificial part of the front-end accessory drive system, protecting other belt driven component as well as the alternator. The correct decoupler pulley ensures smooth, quiet performance as well as increasing vehicle gas mileage. Under normal driving conditions, the original Chrysler pulley will require replacement in approximately 50,000 - 60,000 miles. The original Toyota pulley will require replacement in approximately 100,000 -120,000 miles.
Product Features:
Patented Original Equipment Design
Protects the alternator and other front-end accessory drive components.
Installation instructions included.
New plastic cap included with the OAD.
Tools Required - Litens recommends using a Miller Special Tools P/N 8433A for pulley removal and installation.
Professional mechanics can install this replacement OAD in approximately 1/2 hours. During alternator pulley replacement, belts, tensioners, and routing pulleys should be inspected.
55mm O.D.; 17mm I.D.; 42.65mm width; 6-Grooved running surface ; High-grade steel construction. 17mm Hex bit driver Included for ease of installation.
SPECIFICATIONS
Cap Included: Yes
Clutching Technology: Litens OAD
Color: Black
Instructions Included: Yes
Pulley Groove Quantity: 6
Pulley Inside Diameter: 17 mm
Pulley Lip Diameter: 61.5 mm
Pulley Material: Steel
Pulley Outside Diameter: 55 mm
Pulley Width: 39 mm
Required Tools: 17mm Hex Driver Bit
Width: 42.65 mm