It is currently Thu Mar 28, 2024 5:24 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 1857 posts ]  Go to page Previous  1 ... 77, 78, 79, 80, 81, 82, 83 ... 93  Next
Author Message
 Post subject: Re: DIY ECU Flash
PostPosted: Mon Jan 07, 2019 11:17 am 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
michaldenisiuk wrote:
YETI, yesterday MPPS V13.02 arrived, thats what I get from my ECU always 402 EGR issue occure
Chrysler Voyager 2.8CRD 150HP 2007 BOSCH EDC15C2

Yeti wrote:
p0402 is for stuck open egr you need to block the valve with a plate

See this for making a block off plate:> viewtopic.php?f=5&t=76576

Image

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Wed Jan 23, 2019 6:19 am 
Offline
LOST Newbie

Joined: Wed Jan 23, 2019 6:07 am
Posts: 2
Hi All

Thanks for the great info/help so far

I have the 525 file - original - see dropbox link - from my Chrysler Jeep Cherokee 2.8L CRD Bosch EDC16CP31 K-Line/CAN - manual gearbox

https://www.dropbox.com/s/6h1bttrjcx54v ... 7.Bin?dl=0

Was wondering if anyone can edit the file and remove EGR/FCV for me please or let me know where in ECU Titanium i can edit these two
feel free to add this file to the original list or copies of it.

Thank you
Clyde


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Wed Jan 23, 2019 12:49 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
perthcheetah wrote:
Hi All
Thanks for the great info/help so far
I have the 525 file - original - see dropbox link - from my Chrysler Jeep Cherokee 2.8L CRD Bosch EDC16CP31 K-Line/CAN - manual gearbox
https://www.dropbox.com/s/6h1bttrjcx54v ... 7.Bin?dl=0
Was wondering if anyone can edit the file and remove EGR/FCV for me please or let me know where in ECU Titanium i can edit these two
feel free to add this file to the original list or copies of it.
Thank you
Clyde

Contact (PM) Yeti on this forum

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Tue Jan 29, 2019 1:37 am 
Offline
LOST Newbie

Joined: Wed Jan 23, 2019 6:07 am
Posts: 2
Thank you, Will send Yeti a PM..


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Fri Feb 01, 2019 2:28 pm 
Offline
LOST Newbie

Joined: Thu Mar 29, 2018 5:59 pm
Posts: 1
Anyone have a tune for 617 ECU?


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Feb 03, 2019 2:40 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 872
Location: Biella Italia
I Can do it for every ecu and sw number

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY

https://www.facebook.com/YetiChiptuning


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Tue Feb 05, 2019 5:15 am 
Offline
LOST Newbie

Joined: Tue Feb 05, 2019 3:46 am
Posts: 2
Hi fellas, I'm new and have been searching for an ecu egr delete for a JK Wrangler petrol 3.8 v6. Can anyone point me in the right direction please. sorry for intruding.

Cheers from New Zealand Mud. :shock:


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Tue Feb 05, 2019 6:06 am 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 872
Location: Biella Italia
VardFriki wrote:
Hi fellas, I'm new and have been searching for an ecu egr delete for a JK Wrangler petrol 3.8 v6. Can anyone point me in the right direction please. sorry for intruding.

Cheers from New Zealand Mud. :shock:


egr delete on 3.8 v6 ? is the first time I hear problem in a gasoline

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY

https://www.facebook.com/YetiChiptuning


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Tue Feb 05, 2019 9:32 am 
Offline
LOST Member

Joined: Thu Jan 10, 2019 10:05 am
Posts: 377
Location: Kennewick, wa
Egr is not a problem on gasoline powered rigs, it is used as an octane boost so to speak, without egr the in cyl's temps get higher and you have to either pull back timing or re tune to add more fuel and switch to a higher octane. The old Toyota v6 that use to crack heads and blow gaskets, I found the problem to be a non properly functioning egr.


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Fri Mar 08, 2019 1:28 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Oct 20, 2008 12:24 pm
Posts: 977
Location: Victoria, Canada
CaptainDean wrote:
MPPS V13.02 CD ..
https://www.dropbox.com/sh/j2hj5z74bqgz ... Rjn2a?dl=0
Dean.

Great, will add link to the first page.


perthcheetah wrote:
525 file - Chrysler Jeep Cherokee 2.8L CRD Bosch EDC16CP31 K-Line/CAN - manual gearbox
https://www.dropbox.com/s/6h1bttrjcx54v ... 7.Bin?dl=0
.. feel free to add this file to the original list or copies of it.
Clyde

Thx for the addition.
I will update the first page soon.


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Fri Mar 08, 2019 1:47 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Oct 20, 2008 12:24 pm
Posts: 977
Location: Victoria, Canada
Squeeto wrote:
perthcheetah wrote:
525 file .. manual gearbox

Thx for the addition.
I will update the first page soon.

As far as I know, the .bins have both manual and automatic transmission tables (maps).
Yeti (or anyone) is the tune for an automatic different from a manual or does the transmission controller tell the ecu which map to use?


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Fri Mar 08, 2019 4:45 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 872
Location: Biella Italia
Squeeto wrote:
Squeeto wrote:
perthcheetah wrote:
525 file .. manual gearbox

Thx for the addition.
I will update the first page soon.

As far as I know, the .bins have both manual and automatic transmission tables (maps).
Yeti (or anyone) is the tune for an automatic different from a manual or does the transmission controller tell the ecu which map to use?

there is only 7 torque limiter ..automatic or manual , and change in torque management and torque permitted during shifting ,plus different gear ratio for every gear and DTC table for automatic transmission

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY

https://www.facebook.com/YetiChiptuning


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Fri Mar 08, 2019 9:55 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Oct 20, 2008 12:24 pm
Posts: 977
Location: Victoria, Canada
What I mean to ask is will perthcheetah's 525 bin file work on both automatic and manual transition vehicles?
I think that it will but I just want to be sure.


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sat Mar 09, 2019 4:10 pm 
Offline
LOST Newbie

Joined: Sun Aug 05, 2018 5:09 am
Posts: 13
Hi Yeti I had purchased the weeks stage 1 and 2 kit from Seth back in August. I am just getting to install it next week march 12.
I noticed the kit is no longer available but dont see any reason not to install it.
My question to you is am I best to go with the DIY ecu flash after doing this kit? I have trouble with the FCV and this is reason for doing the kit. One last question is do I have to order the cable on ebay from China? take a while. Thanks for any help
Jim
2006 Liberty CRD


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sat Mar 09, 2019 4:20 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 872
Location: Biella Italia
jimsult wrote:
Hi Yeti I had purchased the weeks stage 1 and 2 kit from Seth back in August. I am just getting to install it next week march 12.
I noticed the kit is no longer available but dont see any reason not to install it.
My question to you is am I best to go with the DIY ecu flash after doing this kit? I have trouble with the FCV and this is reason for doing the kit. One last question is do I have to order the cable on ebay from China? take a while. Thanks for any help
Jim
2006 Liberty CRD


most of the free tune here have not the dtc delete and is a sketch to spur people to studie and DIY , if you want a custom tuned file that can take care of the transmission etcc and completly delete the EGR and FCV contact me in PM here or on my FaceBook page , you can finde the mpps cable on ebay or amazon for a fast shipping

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY

https://www.facebook.com/YetiChiptuning


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sat Mar 09, 2019 4:24 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 872
Location: Biella Italia
Squeeto wrote:
What I mean to ask is will perthcheetah's 525 bin file work on both automatic and manual transition vehicles?
I think that it will but I just want to be sure.


not sure , probably if you load a manual transmission in automatic you have problem and error , if you load an automatic transmission file in a manual .....and you do not know how to edit the torque management............you lose power due to the high limitation in automatic trans file

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY

https://www.facebook.com/YetiChiptuning


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sat Mar 09, 2019 7:11 pm 
Offline
LOST Junkie
User avatar

Joined: Mon Oct 20, 2008 12:24 pm
Posts: 977
Location: Victoria, Canada
Okay, no problem. Easy question to answer if a 525 automatic bin makes it my way.
For now I will just make a note of this on the first page.


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Mon Mar 11, 2019 7:48 pm 
Offline
LOST Newbie

Joined: Sun Aug 05, 2018 5:09 am
Posts: 13
just got new MPPS v13 cable, downloaded drivers and windows 10 sees it fine
Installed MPPS software 12.0.06
when I hook up to 2.8 CRD and run the software it gives error that cant find ECM
I have tried this five times and no luck. Yes key is on but does not see ECM

any suggestions

Jim Sult


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Tue Mar 12, 2019 2:49 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 872
Location: Biella Italia
have you installed the v13.02 after the v12 ?

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY

https://www.facebook.com/YetiChiptuning


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Tue Mar 12, 2019 3:02 pm 
Offline
LOST Newbie

Joined: Sun Aug 05, 2018 5:09 am
Posts: 13
That I am not sure. should I use the files on the CD that came with cable or just download from someplace


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1857 posts ]  Go to page Previous  1 ... 77, 78, 79, 80, 81, 82, 83 ... 93  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com