It is currently Thu Mar 28, 2024 2:40 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Help! Need EGR Y Connector for Jeep Liberty CRD
PostPosted: Tue Jul 09, 2019 10:08 am 
Offline
LOST Newbie

Joined: Tue Jul 09, 2019 9:29 am
Posts: 24
Hi there,
I am rebuilding my EGR and my wife accidentally threw out the metal Y Connector for the EGR Hoses. Does anyone have one?
Thanks, Nick

Image

https://www.dropbox.com/s/rw6fhyq4iu658fk/20190622_122645.jpg?dl=0


Top
 Profile  
 
 Post subject: Re: Help! Need EGR Y Connector for Jeep Liberty CRD
PostPosted: Tue Jul 09, 2019 4:14 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
JeepLovR wrote:
Hi there,
I am rebuilding my EGR and my wife accidentally threw out the metal Y Connector for the EGR Hoses. Does anyone have one?
Thanks, Nick
Image
https://www.dropbox.com/s/rw6fhyq4iu658fk/20190622_122645.jpg?dl=0

Are you removing all the EGR system parts? That is the best thing to do and then you don't need the "Y" connector anymore.
Just plug the coolant hose coming from the head and install a straight 5/8 hose nipple where the "Y" was located. Any parts store will have one.
The crappy EGR system is very bad for this engine and builds carbon sludge inside the intake. :grim: A very good reason to get rid of it!

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Help! Need EGR Y Connector for Jeep Liberty CRD
PostPosted: Wed Jul 10, 2019 12:20 pm 
Offline
LOST Newbie

Joined: Tue Jul 09, 2019 9:29 am
Posts: 24
Hi,
I was going to just replace it because I already have a new EGR valve and Provent kit. If anyone happens to have one laying around I'd really appreciate it? :P


Top
 Profile  
 
 Post subject: Re: Help! Need EGR Y Connector for Jeep Liberty CRD
PostPosted: Wed Jul 10, 2019 3:20 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
JeepLovR wrote:
Hi,
I was going to just replace it because I already have a new EGR valve and Provent kit. If anyone happens to have one laying around I'd really appreciate it? :P

If you are determined to keep the EGR system intack, the parts stores sale a 5/8 plastic "Y" barbed hose connector for heater hoses.
I believe I still have the metal one I took off mine back in 2013 when I totally removed the EGR system, I will check and get back to you if I do. :P

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: Help! Need EGR Y Connector for Jeep Liberty CRD
PostPosted: Wed Jul 10, 2019 7:24 pm 
Offline
LOST Addict
User avatar

Joined: Sat Aug 27, 2016 9:12 pm
Posts: 2505
Location: Oregon Coast Dairy Country. Land of stumps, dumps, and "Liquid Pumps"
A brass "T" fitting will work just as well. It moves from high pressure to low pressure either way.

Fit the straight through from the EGR return hose to the hose from the water pump inlet, and the straight 'T' branch to the heater core return.
No kinked hoses, and smaller installed configuration this way.

Why didn't they do this from the factory? Because "special parts only available from the dealer" make for more profit is why.

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770


Top
 Profile  
 
 Post subject: Re: Help! Need EGR Y Connector for Jeep Liberty CRD
PostPosted: Thu Jul 11, 2019 11:58 am 
Offline
LOST Newbie

Joined: Tue Jul 09, 2019 9:29 am
Posts: 24
Thanks for the great info guys!

I will wait and see if anyone has an original connector and if not I'll get a brass T. :BANANA:


Top
 Profile  
 
 Post subject: Re: Help! Need EGR Y Connector for Jeep Liberty CRD
PostPosted: Thu Jul 11, 2019 6:54 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
You lucked out,
I Found it, PM me if you still want it and we can make shipping arrangements.

Image

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com