Has anyone bought any CHEAP mud mats for their Liberty that actually fit, or made something?

The floor pans in the liberty are pretty small.

I don't have the benjamins to spend on weathertech mats, or anything.

Just needs something to keep the mud and blood off from hunting this season.

I know there are some cheapskates like me on this forum that have come up with something that works well.

Thanks.

Hi fellow cheapskate!
I got my hands on some thin conveyor belting & just cut to size. You do have folds in the corners as its not molded into shape. When it gets to be a mess, just throw it out & cut out a new piece.
I dont buy carpet mats, I just cut out pieces from some off cut I got for free from a carpet place.

_________________
Australian KJ CRD 2006

Take a look at Husky Floor liners, not as pricey as Weathertech and good quality.
Had a set in mine since 2013 and they have held up well.

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

+1 husky. Half the price of weather tech and same quality. I got the rear tray too.

_________________
2005 limited, tinted, OME lift, falken wildpeak 245/75-16, Suncoast, Transgo, Chevy fan+clutch, 195° Kap Stat Mod, Derale tranny cooler, Provent, Stage 2 tune, EGRdelete, Cat delete, Group65 batt, V6 airbox, tow brakes, switchblade key, DIY roof rack, DIY Front bumper,
Future; rear bumper, true tracs, tank fuel pump, webasto heater, 5sp manual

I'll cast a vote for OEM rubber mats in the cabin, and anything else for the rear.

There is an OEM cargo liner for the KJ that is best avoided. If you're familiar with the sort of material typically used as taxi floor covering, this looks like the same stuff only stiffer. It does cover the seat back, but attaches to the seat with plastic hooks that get clipped onto the headrest supports. These have to be unclipped every time you want to put the seats down and can only be put back with the seat back upright, which is a real pain. It also has a coefficient of friction with any object placed on it approaching that of ice on ice.

The Mopar part number for this abomination is 82206761. Don't be tempted.

_________________
2005 KJ CRD Limited 4x4:
245/75R16 BFG TA KO2s
OME / Clevis 2.5" Lift
JBA Lifted A-Arms
IRO WJ Short Rear UCA/WWDiesel mount
Skid Row Skidplates
HDS Model 001 Thermostat (190°F)
Suncoast TC
Full Weeks Kit
Bosch 5V glow plugs
Hayden 2986 fan clutch / GM 11-blade fan
Samco / Sasquatch Intake Hoses
Carter in-tank pump
Provent 200
V6 Airbox

After looking at the advice here, I decided to go with the full set of Husky liners.
I used a couple gift cards and it totaled about $250.00 for all the floor mats and trunk mat, on Amazon. So for the little bit extra the gift cards didn't cover, I'll just skip beer this month.



Thanks for all the great advice.

Not cheap even still but far superior to generic options imo.

_________________
2005 limited, tinted, OME lift, falken wildpeak 245/75-16, Suncoast, Transgo, Chevy fan+clutch, 195° Kap Stat Mod, Derale tranny cooler, Provent, Stage 2 tune, EGRdelete, Cat delete, Group65 batt, V6 airbox, tow brakes, switchblade key, DIY roof rack, DIY Front bumper,
Future; rear bumper, true tracs, tank fuel pump, webasto heater, 5sp manual