Heater core 2.0

Chuci · **Posted:** Fri Feb 19, 2021 5:14 pm

I just got the heater core today, any tips for the installation?

WWDiesel · **Posted:** Fri Feb 19, 2021 10:02 pm

Take your time, label every bolt/screw you remove, organize them in baggies by sections as you remove them.
Take lots of pictures so you can refer back to them when reassembling.
There are some good Youtube videos you can watch to get some pointers.
Just search on Youtube for Jeep Liberty heater core replacement. :google:

Chuci · **Posted:** Mon Feb 22, 2021 7:21 pm

Im not sure what I’m supposed to take off here. The left side or the hoses with the foil around it.

Mountainman · **Posted:** Mon Feb 22, 2021 10:23 pm

The ones on the right. The left ones are AC lines

Chuci · **Posted:** Mon Feb 22, 2021 10:58 pm

Mountainman wrote:

The ones on the right. The left ones are AC lines

I took them off and I’m stuck on how to take off the heater core. Do I have to move back the heater box?

Chuci · **Posted:** Mon Feb 22, 2021 11:41 pm

I just need to get this hooks off of the old heater core and I can take it off

My66dodge · **Posted:** Tue Feb 23, 2021 9:41 am

I am trying to put off the failed heater core I have... I finally got another Jeep ready to sell and my wife got it detailed up, left it in the shop over the weekend and when we came back Monday there was a puddle of coolant under it so I crawled under it and found it needed a heater core... that was 6 months ago, it will get done one of these days so I can finally get it sold....

Sent from my iPad using Tapatalk

Chuci · **Posted:** Tue Feb 23, 2021 11:15 am

My66dodge wrote:

I am trying to put off the failed heater core I have... I finally got another Jeep ready to sell and my wife got it detailed up, left it in the shop over the weekend and when we came back Monday there was a puddle of coolant under it so I crawled under it and found it needed a heater core... that was 6 months ago, it will get done one of these days so I can finally get it sold....

Sent from my iPad using Tapatalk

I do not blame you for putting it off. It has been a real pain. I had a better time installing my turbo!

Chuci · **Posted:** Tue Feb 23, 2021 12:31 pm

I can’t take off the hooks without breaking them. I also saw that the new heater core doesn’t have anywhere for the hooks to grab on to.

Mountainman · **Posted:** Tue Feb 23, 2021 1:30 pm

The only ones I have pulled were on 2 rusty jeeps I completely parted out.
Hopefully the videos or write ups online will help

Heater core 2.0

Who is online