RockinRam96 wrote:
I recently bought an 05 CRD with a broken lower ball joint that obviously needs replacing. I also plan on putting a lift on the truck. I have gone through pretty much every part and replacing with Moog parts.
I have had a lot of experience with Moog parts on may other vehicles in the pas. IMHO, we’ll worth the money. Especially with a lift and a vehicle that will be putting additional stress on parts.
The CV shaft also needed replacing on mine. I got a new unit through Advance Auto Parts. Came in in a few days.
FYI NOTE: The CV axle shafts on the diesel powered Jeep Liberty CRD's are a unique length onto themselves.
The CV axle shafts on gas powered Liberty's use different length shafts and although they will fit & function, they will not last very long.
Make sure they provided you with the correct axle shaft assemblies for a
2.8 diesel powered CRD Liberty and
not for a gas powered vehicle.
Quote:
Exact Fit for 2005 Jeep Liberty Limited w/2.8 CID 4X4 w/545RFE Transmission
NAPA Axles (reman) Line: NAPA Premium CV Shafts
Front – Driver/Left side - NCV 940085-- CV Driveshaft Compressed Length 23.74 in.
Front – Passenger/Right side - NCV 940084 -- CV Driveshaft Compressed Length 23.7 in.
Autozone: Line Duralast Gold
Front – Driver/Left side: 10168N -- CV Driveshaft Compressed Length 23.74 in.
Front – Passenger/Right side: 10169N -- CV Driveshaft Compressed Length 23.7 in.
Advance Auto Parts: Line Carquest Premium
Front – Driver/Left side: NCV82013 -- CV Driveshaft Compressed Length 23 13/16 in
Front – Passenger/Right side - NCV82014 -- CV Driveshaft Compressed Length 23 11/16 in
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve