CaptainDean wrote:
CaptainDean wrote:
Axle shaft A compressed: 23 7/8", extended: 25 even. Span: 1 1/8", middle length: 24 7/16" (+/-9/16).
Axle shaft B compressed: 24 3/8", extended: 26 3/8". Span: 2", middle length: 25 3/8" (+/- 1").
Axle shaft C is installed: I'll measure it later, but it's clunking.
Any help out there?
Dean.
Still have the box for one of my half shafts, it is from O'Reilly Auto Parts; a Precision brand part, p/n AM8003.
This item has quite a bit of on-line information, including the Compressed Length of 602mm & 23 11/16".
That matches up close enough with my Axle Shaft A.
Still, any other insight out there?
Dean.
That 24 3/8" seems a little long to me??
Have this on file:
*If any of the lengths are incorrect, please advise! Neither IDParts or Sasquatch Parts list the lengths for the axles.
NAPA Axles (reman) Line: NAPA Premium CV Shafts
Front – Driver/Left side - NCV 940085-- CV Driveshaft Compressed Length 23.74 in.
Front – Passenger/Right side - NCV 940084 -- CV Driveshaft Compressed Length 23.7 in.
Autozone: Line Duralast Gold
Front – Driver/Left side: 10168N -- CV Driveshaft Compressed Length 23.74 in.
Front – Passenger/Right side: 10169N -- CV Driveshaft Compressed Length 23.7 in.
Advance Auto Parts: Line Carquest Premium
Front – Driver/Left side: NCV82013 -- CV Driveshaft Compressed Length 23 13/16 in
Front – Passenger/Right side - NCV82014 -- CV Driveshaft Compressed Length 23 11/16 in
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve