Washer bottle replacement

chefdab · **Posted:** Sun Jul 24, 2005 3:13 am

With all this talk of bumpers lately, I was thinking, what happened to the write up somebody did about a washer bottle replaement? It's not in the tech articles so it must have just been a regular thread on the old board. Would whoever did that write up mind reposting it? Cause if all these people do get new bumpers, they'll need to relocate their washer bottles at the same time.

Steakgoddess · **Posted:** Sun Jul 24, 2005 11:37 am

I'd be interested in that write-up, too. Especially since my washer bottle is zip tied up under the hood since the bumper was cut. (It may not be fancy, but it works.)

AdamIsAdam · **Posted:** Sun Jul 24, 2005 9:28 pm

yes, please post a write up complete with source and P/N for bottle. (ie, Napa 12345)

acbafam · **Posted:** Thu Jul 28, 2005 5:50 pm

I just noticed where it was on my 05 today... might need a stone deflector for it in Baltimore... this said after widshield broken and hood chipped... Thanks to MD SHA!

KJ04 · **Posted:** Sat Jul 30, 2005 2:59 pm

Interdynamics BVR4 http://www.partsamerica.com/ProductDetail.aspx?categorycode=3052&mfrcode=IDN&mfrpartnumber=BVR4

Drill holes for pump and sensor and add about 14 inches of wire. The hoses will reach the fender. Use 2 self tapping screws to mount on fender.

AdamIsAdam · **Posted:** Mon Dec 05, 2005 10:54 pm

Bump.
Thanks for this.

AdamIsAdam · **Posted:** Mon Dec 05, 2005 11:01 pm

ARGH!

I just ordered this part and then looked at your pics again. I've got a control module of some sort mounted right there on my KJ. Do you not have ABS perhaps?

Shoot. now I gotta cancel this order and see what bottle will fit up in this KJ engine compartment.

Guest · **Posted:** Tue Dec 06, 2005 12:41 am

adam, that's the transmission computer. just mount the sucker beside the computer, and make sure it don't leak;)

0311_DoC · **Posted:** Sat Nov 03, 2007 4:04 pm

so can anybody add more to this write up? it was kinda vague ....

_UnLiMiTeD_ · **Posted:** Sat Nov 03, 2007 4:06 pm

and this is for people that have cut bumpers? Seeing as i dont see any problem with the current set up

0311_DoC · **Posted:** Sat Nov 03, 2007 4:16 pm

its for the people that cut bumpers and/or get after market bumpers. the washer bottle hangs in the way of the new approach angle or is just a plain eye sore if you trim or get new bumper

Jeepjeepster · **Posted:** Sat Nov 03, 2007 5:29 pm

Doesnt the ARB just shield the bottle? Why cant they all do that?

snowsport · **Joined:** Tue Oct 18, 2005 11:52 pm **Posts:** 1211

Yes, I find the ARB shield is fine. It's not in the way IMO. I think some just don't like the way it looks having the shield there.

AdamIsAdam · **Posted:** Sun Nov 04, 2007 11:45 am

I have the ARB and used the shield. It looks fine since it's painted black and the rest of the bumper I had painted body color. Really helps it look invisible.

pics on my web site

KJ04 · **Posted:** Sun Nov 04, 2007 12:33 pm

The shield is quite flimsy, still hangs down, and is prone to damage.
Much cheaper to get a $10.00 over flow bottle and relocate it than having to replace the washer pump if it gets broken.

Washer bottle replacement

Who is online