Like the locking hub thread I'm a big fan of rear full floaters. I don't like the weight of the vehicle riding on the rear axle and having a single axle bearing. Though I'm sure nobody makes a kit for the kJ does anyone make one for the 8.25"'rear end that might be in other vehicles? Axles can be made easy enough.

Thanks.

_________________
2006 KJ CRD Ltd - Suncoast, GDE Eco, EGR Delete, After market T-Stat, Skid Row skids, V6 airbox, 2.5" Turbo back
2005 KJ CRD Sport-Suncoast, Transco, GDE Hot-GDE Trans, EGR Delete, Skid Row skids, V6 airbox, 2.5" Turbo back, After market S-Stat
1987 Suzuki LWB Samurai -diesel powered, custom 4 link coil suspension 38.5 SX Swampers

Jeep Dana 35's, 44's, and 60's yes, but haven't ever seen one for the 8.25. Though the axle is used in XJ's and IIRC WJ's among others, if you dig hard enough, you may find one.

_________________
- Mike
'12 JK

Jeep Tech Files

No full floater kit for the 8.25.Warn even axed the rear full floater kits for the D35-D44 long ago,to many problems with the spindles.You want a full floater a D60 or C14 should be on your list,then you might as well SFA it.