Straight6Jeff wrote:
Mine did the same thing, stopped working....different problem. I pulled the a-pillar plastic off and checked the connector....had voltage to that point. So that means the switch and relay are operational. Go to the roof, pull the light shroud off, and check the connector at the light bar...had voltage there. Plug the connector back in and the lioghts work. Wiggle the roof connector and the lights flicker. Turned out to be a loose pin in the lightbar side connector. Few seconds with a pair of needle nose and some urethane sealer and all is back to normal.
Nice!
Don't you love easy (electrical) fixes?