Well it's done--With pic's-fixed

InCommando · **Posted:** Wed May 06, 2009 6:53 pm

In Ohio we mostly speak & type in English. :lol:

Are you planning on running a bigger/ more aggressive tire?

tonycrd · **Posted:** Wed May 06, 2009 7:23 pm

If you can afford it, do not get rancho or OME front shocks for your CRD...buy KONI. Trust me.

JeepBumm68 · **Posted:** Wed May 06, 2009 9:26 pm

HAHA true true. But you do have Mexican farm hands up there hahaha.

Anyways yes probably gonna run 32's with more aggresive tread.

And Yes going to lift it higher. Also the fender trim is for the SFA and 35's she well run next year. Planned ahead.

Why buy koni for Shocks? What makes them better suited for the CRD than Rancho or OME?

KJ 119 · **Posted:** Wed May 06, 2009 9:35 pm

I think it looks good,almost a flat fender style.
If the lady likes it then it's all good.

0311_DoC · **Posted:** Wed May 06, 2009 11:07 pm

tonycrd wrote:

If you can afford it, do not get rancho or OME front shocks for your CRD...buy KONI. Trust me.

So what do the KONI's do that the OME/ranchos do not? and what if lets say you have a 110# bumper with a winch on it

JeepBumm68 · **Posted:** Wed May 06, 2009 11:27 pm

thanks guys and kj 119. Ya the girl loves it. WE plan on like i said doing tube fenders on there. The flat fender look is what we are going for.

Ya i can't wait to find out either.

05infernoCRDL · **Posted:** Thu May 07, 2009 12:39 am

seth want me to run out and measure my CRD... ya know you could text me with these things some times :roll:

lol

JeepBumm68 · **Posted:** Thu May 07, 2009 6:19 pm

HAHA ya trevor can you. i forgot bro. i know your busy with the job and the libby trans

05infernoCRDL · **Posted:** Thu May 07, 2009 9:35 pm

you'll now have to wait cause the trans is out now so it won't be sitting corretly

JeepBumm68 · **Posted:** Mon May 11, 2009 6:23 pm

Can someone get me the ride height of a stock CRD Liberty 2006 please. I want to measure how much is it sagging even with the lift. Thanks everyone. I am guessing i am going to have to measure the lift from the ground to the bottom of the rocker guards since flares are cut yes?

tommudd · **Posted:** Mon May 11, 2009 7:41 pm

JeepBumm68 wrote:

Can someone get me the ride height of a stock CRD Liberty 2006 please. I want to measure how much is it sagging even with the lift. Thanks everyone. I am guessing i am going to have to measure the lift from the ground to the bottom of the rocker guards since flares are cut yes?

That will not be a true measurement due to different tire sizes, if the tires are new or old, etc. Maybe measure from the middle of the wheel to another part of the flare that is left, post that spot and someone can measure the same place??

Guest · **Posted:** Mon May 11, 2009 8:06 pm

JeepBumm68 wrote:

Bumpstops worthless in are cause since it well just limit the up travel

All Your Base Are Belong To Us?

*shudder*

ThunderbirdJunkie's ocular orifices are offended by this blatant destruction of our beloved language.

www.dictionary.com

Learn the difference between Will and Well.

This has been a public service announcement, sponsored by ThunderbirdJunkie LLC. The views and statements within this announcement DO, IN FACT, represent the thoughts, views, statements, and annoyances of ThunderbirdJunkie himself.

tommudd · **Posted:** Mon May 11, 2009 8:21 pm

ThunderbirdJunkie wrote:

JeepBumm68 wrote:

Bumpstops worthless in are cause since it well just limit the up travel

All Your Base Are Belong To Us?

*shudder*

ThunderbirdJunkie's ocular orifices are offended by this blatant destruction of our beloved language.

www.dictionary.com

Learn the difference between Will and Well.

This has been a public service announcement, sponsored by ThunderbirdJunkie LLC. The views and statements within this announcement DO, IN FACT, represent the thoughts, views, statements, and annoyances of ThunderbirdJunkie himself.

05infernoCRDL · **Posted:** Mon May 11, 2009 10:14 pm

i think somewhere i read that a correct place to measure from is the pinch at all 4 corners of the unibody...

JeepBumm68 · **Posted:** Mon May 11, 2009 10:20 pm

Alright ill try measuring in a few place. IF someone can get me the stock measurements of a CRD, which was my question anyways that seems no of you can answer since you tend to move most of your thought process onto other regions of postings and things of incorrect grammar. Since apparently your will power to answer a question of simple process seems to blow by your head i'll ask agian.

What is the stock measurement of the CRD liberty, so i can check and see how much lift the Girl's CRD is actually running.

Sorry for the inconvenience of TBJ having to use brain power and correct something that was yes bad grammar and un-like me. Sorry to have strained you so much that you had to make a public announcement to everyone stating this. And here i though people would actually answer questions of peers trying to find answers or am i totally wrong?

And Trevor I well probably be contacting you to just have you measure your CRD as is so i can get some type of measurement to full fill my own interest in this matter.

Thank you!

tonycrd · **Posted:** Thu May 14, 2009 12:05 pm

0311_DoC wrote:

tonycrd wrote:

If you can afford it, do not get rancho or OME front shocks for your CRD...buy KONI. Trust me.

So what do the KONI's do that the OME/ranchos do not? and what if lets say you have a 110# bumper with a winch on it

They are adjustable. So what ever you hang on the front you can make them tougher to fit your needs.

tommudd · **Posted:** Thu May 14, 2009 12:24 pm

tommudd wrote:

JeepBumm68 wrote:

Can someone get me the ride height of a stock CRD Liberty 2006 please. I want to measure how much is it sagging even with the lift. Thanks everyone. I am guessing i am going to have to measure the lift from the ground to the bottom of the rocker guards since flares are cut yes?

That will not be a true measurement due to different tire sizes, if the tires are new or old, etc. Maybe measure from the middle of the wheel to another part of the flare that is left, post that spot and someone can measure the same place??

what I said before, and measuring from the pinch weld tells you nothing unless you both have the same size tires and they are both worn the same :wink:

so 05infeno is well not right :shock:

JeepBumm68 · **Posted:** Thu May 14, 2009 12:42 pm

ok thanks tonycrd. I'll look into them. Can they handle both the ARB bumper and a Warn 9k to 10k winch?

And ok tommudd ill try something

05infernoCRDL · **Posted:** Thu May 14, 2009 12:51 pm

tommudd wrote:

what I said before, and measuring from the pinch weld tells you nothing unless you both have the same size tires and they are both worn the same :wink:

so 05infeno is well not right :shock:

one of my suggestions to jeepbumm was for us to get together and swap tires out and then measure.. but my truck currently has the transmission out of it

tommudd · **Posted:** Thu May 14, 2009 2:39 pm

05infernoCRDL wrote:

tommudd wrote:

what I said before, and measuring from the pinch weld tells you nothing unless you both have the same size tires and they are both worn the same :wink:

so 05infeno is well not right :shock:

one of my suggestions to jeepbumm was for us to get together and swap tires out and then measure.. but my truck currently has the transmission out of it

Whoops thats not good at all! :shock:

Well it's done--With pic's-fixed

Who is online