| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| where is the data link connector? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=10382 |
Page 1 of 1 |
| Author: | chetos [ Wed Jul 12, 2006 8:18 pm ] |
| Post subject: | where is the data link connector? |
I am gonna do a mock up connection for an evic to see if it works before I do all the cutting. I am using the instructions in the how to. everything looks straight forward. I am probably look right at and it's just not clicking. thanks. |
|
| Author: | chetos [ Wed Jul 12, 2006 8:58 pm ] |
| Post subject: | |
I believe it's the ORBII connector or whatever it's called. The wires are slighty off color to what it says in the how to directions but I believe that's what they are. I just need to go to tool store and by an external torx set so I can pull the driver side pillar. This drove me nuts. It's not 1/4 nor 3/16. It's not 6 mm or 7mm. What sort of bolt/screw head will they come up with next... |
|
| Author: | Boi1ermaker [ Thu Jul 13, 2006 10:34 am ] |
| Post subject: | |
Quote: pull the driver side pillar. This drove me nuts. It's not 1/4 nor 3/16. It's not 6 mm or 7mm
I think i used a 7/32 attachment, which i had to get a sears. Since i've never found any other use for it, it now sits in the KJ with some other tools i carry. btw, in case you didn't find the answer yet, the connector you're looking for is under the driver side dash on the right side. It's recessed back a few inches from being flush with the front ot the dash. |
|
| Author: | Gentleman [ Thu Jul 13, 2006 10:34 pm ] |
| Post subject: | |
It's 5.5mm Bob |
|
| Author: | chetos [ Fri Jul 14, 2006 12:05 am ] |
| Post subject: | |
Gentleman wrote: It's 5.5mm
Bob I bought a 7/32 deep socket and it worked but the nut isn't in very tight so a deep socket 5.5 would work...so...is it SAE or metric? HHMMMM either works my guess is that it's metric. I am gonna take some pics of the install showing the wiring color...it's a little different in the 05 and how the special order evic bracket goes in...too bad it won't be in tell next week! 
|
|
| Author: | Gentleman [ Fri Jul 14, 2006 10:01 am ] |
| Post subject: | |
mm is millimeters which is metric Bob |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|