Hey all, I've been reading and posting in many of the threads on L.O.S.T. concerning seat problems and whatnot. Today I decided to tool around a bit and see what I could come up with, I was going to simply remove the seat & frame from the vehicle at first and simply put some spacers underneath it as some have recommended.
Well I happen to realize something that I could never figure out. At the front of the seat above the positioning bar, there is a little plastic tab that has been hanging there since I bought the thing and I could never figure out what it was for. I actually pulled up on it and the seat fabric and cushion lifted off the frame below.
Seeing as how I would simply just like to be able to get some more thigh support in the front of the seat, I decided to stuff a few USAF manuals I had underneath the exposed seat cushions to see if that would help. They ended up fitting perfectly and did raise the seat enough for me to be more comfortable than before.
I took a quick spin to see how it worked out and it was better, although I did not get all the support that I really wanted. So I went back home and found some old beer bottles I was collecting and decided to stick those underneath the seat... low and behold they worked just he way I wanted! Call me crazy but I think anyone and everyone who doesn't have power seats should try this, you don't have to have beer bottles, just use whatever you can find and see how it works.
I'll try to get some pics up as I'm sure I've confused some people
