| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| can you ID what these are? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=10708 |
Page 1 of 1 |
| Author: | Cowcatcher [ Sun Jul 23, 2006 12:35 pm ] |
| Post subject: | |
The bottom one is the diagnostic port, we all have them. The top one looks like someone had bars or running boards/steps on it in the past and left part of thebraket attached when they were removed. |
|
| Author: | Bakerkj [ Sun Jul 23, 2006 12:38 pm ] |
| Post subject: | |
the brackets on the side look like they are for a step rail. They bolt on, so they should be easy to remove. |
|
| Author: | DarbyWalters [ Mon Jul 24, 2006 10:35 am ] |
| Post subject: | |
Didn't the Renegade have removable Side Rails? You could add them to other KJ's... That other "thing" does not look like something stock at all...Do you have to blow in a tube to start your KJ? Nah, it is just the camera adds 10lbs... It is a port for a diagnostic device... |
|
| Author: | MoladoGuy [ Mon Jul 24, 2006 12:11 pm ] |
| Post subject: | |
The brackets on each side of the liberty is for mounting a step bar, tube bar, etc... I just took my tubular mopar bars off the Jeep and those were the last things I removed. You need a deep socket to get them off, size 15mm. Once you remove the nuts you will have to play "puzzle time" to get the u-bolt off. They are not individual bolts, rather a piece that snakes it way into the axle and back out the other end. Just like our famous front end tow hook bolt. I'm rambling on because I don't even know what they are called and I will shut up now |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|