LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Who has factory rock rails on an 03?
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=10712		 Page 1 of 1
Author:  Jeep Dawg [ Sun Jul 23, 2006 3:53 pm ]
Post subject:  Who has factory rock rails on an 03?
I have a set of factory rock rails that I bought from ebay and when I went to install them today, I noticed that the holes lighn up with octagon shape holes on the frame. Do I need some kind of threaded studs to do the install?

Please give me some info on this. Part numbers, pictures and what ever that you might have to help me to install these factory rock rails.

Thanks fellow jeepers.......
Author:  elephantrider [ Sun Jul 23, 2006 4:20 pm ]
Post subject: 
pn - 6507091aa

its just called a fastener, parts dept. also calls it a nutzert.

should be $2 / ea, whatever dealership you go to will more than likely have to order from detroit or milwaukee as it is a factory only part.

anyway, good luck, if you need any help with the install, check out the link below, it gives good directions ( pdf file )

http://site.justforjeeps.com/guide/82208760.pdf
Author:  Jeep Dawg [ Sun Jul 23, 2006 4:58 pm ]
Post subject: 
AWSOME FELLA!
thanks alot for that info. The PDF files was great. I did not have that to go by.
I kinda figured it was going to install like thie pic but was not 100% sure. Thank you for the P/N's
Author:  moose [ Mon Jul 24, 2006 2:09 am ]
Post subject: 
jasonk wrote:
pn - 6507091aa

its just called a fastener, parts dept. also calls it a nutzert.

should be $2 / ea, whatever dealership you go to will more than likely have to order from detroit or milwaukee as it is a factory only part.

anyway, good luck, if you need any help with the install, check out the link below, it gives good directions ( pdf file )

http://site.justforjeeps.com/guide/82208760.pdf


JasonK, Don't forget that he'll need 16 of them :)

(Hope you got your other side installed!)
Author:  elephantrider [ Mon Jul 24, 2006 9:38 am ]
Post subject: 
right! good point. on the directions link i gave him, it says you need 16, but just to be safe...


you need 16 of those!!
Author:  Liberator [ Tue Jul 25, 2006 5:09 pm ]
Post subject:  nice
excellent info Jason, another example of LOST members helping out other members...


what other pdf files in here?

8) 8) 8)
Author:  smitty1938 [ Tue Jul 25, 2006 5:20 pm ]
Post subject: 
You will really get tired putting all those nutzerts in place. Wear safety glasses because a lot of dirt will fall in your face.
Author:  Jeep Dawg [ Tue Jul 25, 2006 7:01 pm ]
Post subject: 
Yea, I all ready got that crap in the eye looking up at it.

So how come I will need 16 of thoes things? I only see a total of 8 spots for them. 4 on both sides.

I will go look at that cut sheet that you sent me.

Again, You L.O.S.T. guys are the best! :!: :!: :!: :!: :!: :!: :!: :!: :!:
Author:  smitty1938 [ Tue Jul 25, 2006 7:40 pm ]
Post subject: 
There are 8 nutzerts on each side to hold the 2 rail mounts up and 2 other bolts on each side that do not require nutzerts. You will have a total of ten bolts and 8 nutzerts plus two rail supports with a small piece of rubber for vibration isolation on the rail supports. This is for each rock rail.
Author:  Jeep Dawg [ Tue Jul 25, 2006 8:55 pm ]
Post subject: 
ok i got ya now.
thank you for that info.
Author:  corwyyn [ Wed Jul 26, 2006 4:32 am ]
Post subject:  Re: nice
Liberator wrote:
excellent info Jason, another example of L.O.S.T. members helping out other members...


what other pdf files in here?

8) 8) 8)

Here are all the ones I found (yes I have too much time on my hands):
Export KJ rear splash guards
Export KJ front splash guards
Liberty step bars
Liberty gas tank skid
Liberty front tow hooks
Liberty rear tow hook
Liberty Renegade light bar (roof)
Liberty door scuff plates
Zippered spare cover
Liberty factory subwoofer
Liberty side steps (one of several)
Liberty factory tow harness
Another Liberty tow harness
Liberty factory rear hitch
U-connect (multiple models)
Liberty fog lights
Liberty taillight protectors
RB1 Navigation radio
Remote start manual
Liberty remote start
Liberty engine skid
Liberty transfer case skid
Liberty transmission skid
Liberty, GC front grille
Liberty front grille protector
Liberty step bars
Liberty front splash guards
Liberty seat covers (1 of 2)
Liberty seat covers (2 of 2)
Liberty/GC cargo net
Liberty security system
Liberty fog lamps

I'll post this in the tech section as well. Enjoy!
Author:  Jeep Dawg [ Sun Sep 03, 2006 2:01 pm ]
Post subject: 
MAN NEED HELP!
i got the nutzerts for the rock rails.
I have been trying to figure out how the hell they stay in place. I see they are showing a longer bolt and an open nut. I am guessing that this is pulling the nutzert and collapsing it behind the frame. But Mine keeps turning and it stripps the hex shape.

What do I do now?
I am thinking of tack welding them in place. is this a good idea?
Author:  Jeep Dawg [ Mon Sep 04, 2006 9:20 am ]
Post subject: 
Never mind guys.
A friend of mine had a arc welder. So I took it over to him last night and he tacke welded all of thoes nutzerts in place and good lord this rock rail was on tight as all hell.
Author:  Jeepjeepster [ Mon Sep 04, 2006 9:36 am ]
Post subject: 
Jeep Dawg wrote:
Never mind guys.
A friend of mine had a arc welder. So I took it over to him last night and he tacke welded all of thoes nutzerts in place and good lord this rock rail was on tight as all hell.


Haha, I guess those will never pull out. Good job! They make a special tool to do just what you said.

Image

You hold that wrench in that pic still and tighten the bottom bolt to crush the nutzert into place. :wink: That was on my tcase skid.

Here it is in place.

Image

Just another pic of the tool. That is just a sleeve where I had that wrench on it in the first pic, its not threaded onto the bolt. It keeps the nutzerk from turning while you tighten the bottom bolt.

Image
Author:  Jeep Dawg [ Mon Sep 04, 2006 10:12 am ]
Post subject: 
great pisc man.
I was having a problem with the nutzert turning on me. Well I did not have the tool, but I used the same tool that came with my light bar. I just could not get the damm thing to stop turnning on me. So thats when I called my friend and we took care of that problem. The rock rails are now secure tightly to the frame.....
I was gonna take pics but it was too dark and we wanted to get done as soon as we could.
Author:  Jeepjeepster [ Mon Sep 04, 2006 10:30 am ]
Post subject: 
Jeep Dawg wrote:
great pisc man.
I was having a problem with the nutzert turning on me. Well I did not have the tool, but I used the same tool that came with my light bar. I just could not get the damm thing to stop turnning on me. So thats when I called my friend and we took care of that problem. The rock rails are now secure tightly to the frame.....
I was gonna take pics but it was too dark and we wanted to get done as soon as we could.


Im sure it will be alot stronger now. It would it been awesome if you could of gotten then in and also welded in! Couldnt you crush then in now that they are welded in?
Author:  Jeep Dawg [ Mon Sep 04, 2006 6:40 pm ]
Post subject: 
Jeepjeepster;

Yes. Now that thoes nutzerts are weldec in place, I was able to get them to collaps while I was thightning the bolts to the rock rails.

It is fo freaking tight against the frame and you can not budge it at all.
Author:  merc05liberty [ Tue Apr 30, 2013 1:55 am ]
Post subject:  Re: Who has factory rock rails on an 03?
Does anyone have the part number for the nutzerk tool for installing the nut zerks, and the bolt and washer? I purchased a used set from an '05 renegade for my limited and now need the nut zerks, tool, bolt with washer. I stopped by Lithia today (our jeep dealer) and they looked at the same Mopar install page that I downloaded from justforjeeps.com and the parts guy said "mine come with hardware. Not a clue the parts numbers good luck". Any help would be great!
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/