LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

skid plate question
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=11327		 Page 1 of 1
Author:  ratmloud [ Fri Aug 11, 2006 3:11 pm ]
Post subject:  skid plate question
Skid Plate-Transfer Case(2004-2006) (L82209455)

will this fit my 03 kj? its the only one listed?
Author:  ratmloud [ Fri Aug 11, 2006 4:01 pm ]
Post subject: 
anyone, anyone? bueller?
Author:  Waldn [ Fri Aug 11, 2006 4:07 pm ]
Post subject: 
I don't believe anything changed from 03 to 04
should fit like a glove
Author:  Jeepjeepster [ Fri Aug 11, 2006 4:21 pm ]
Post subject: 
The skid I have for my 04, one if the bolt holes does not even line up? You should be ok. :wink:
Author:  Waldn [ Fri Aug 11, 2006 6:28 pm ]
Post subject: 
Jeepjeepster wrote:
The skid I have for my 04, one if the bolt holes does not even line up? You should be ok. :wink:


Which hole? all mine lined up.
Author:  Jeepjeepster [ Fri Aug 11, 2006 7:55 pm ]
Post subject: 
Image

I didnt even worry with drilling a new hole, it should be fine. Do you have a pic of yours waldn?
Author:  Waldn [ Sat Aug 12, 2006 4:39 am ]
Post subject: 
no pic but I'll take one, one of these days when its not raining.
Author:  Jeep Dawg [ Sat Aug 12, 2006 7:43 am ]
Post subject: 
Yea man it will fit.
I have a front skid on my 03 KJ. The skid came off of an 04.

You will not have any problem with it linning up.
Author:  Waldn [ Sat Aug 12, 2006 6:30 pm ]
Post subject: 
Jeepjeepster wrote:
Image

I didnt even worry with drilling a new hole, it should be fine. Do you have a pic of yours waldn?


here's some pics I took today

Image

Image
Author:  Bullet [ Sat Aug 12, 2006 6:49 pm ]
Post subject: 
Cool, now I know what the bottom of a KJ looks like with skids....I was wondering :lol:
Author:  Jeepjeepster [ Sat Aug 12, 2006 9:19 pm ]
Post subject: 
Hmm, thats crazy waldn. Wonder why my cross member doesnt have that hole? Thanks for the pics though.
Author:  unixxx [ Sat Aug 12, 2006 11:42 pm ]
Post subject: 
Jeepjeepster, you could just drill and tap one. I did that for the radiator skid for my ARB because two of the holes were missing from the crossmember.
Author:  jpzkj [ Sat Aug 12, 2006 11:45 pm ]
Post subject: 
Bullet wrote:
Cool, now I know what the bottom of a KJ looks like with skids....I was wondering :lol:



You put your Frankenlift on (mostly by yourself)...time to go slide under Bullet and see whats down there !!

:wink:
Author:  Bullet [ Sun Aug 13, 2006 11:00 am ]
Post subject: 
jpzkj wrote:
Bullet wrote:
Cool, now I know what the bottom of a KJ looks like with skids....I was wondering :lol:



You put your Frankenlift on (mostly by yourself)...time to go slide under Bullet and see whats down there !!

:wink:


Very true, but I think I will take her to my dads....he has a hoist...much easier. I am going to use his shop when I put the skids on.
Author:  moose [ Mon Aug 14, 2006 7:54 am ]
Post subject: 
After having to drop my diff skid and pound it back flat at Camp Jeep, I'll probably be getting heavier skids. The OEM skids are like the OEM Rock Rails - they'll work, but they'll bend.... I guess the good news is that a 15mm and a 3# hammer will fix it.
Author:  Jeepjeepster [ Mon Aug 14, 2006 10:52 am ]
Post subject: 
Hmm, the front skid is usually the strongest one moose, but its the one that gets hit the most also. After you get a lift, it will be much better. :wink:
Author:  moose [ Mon Aug 14, 2006 9:48 pm ]
Post subject: 
Jeepjeepster wrote:
Hmm, the front skid is usually the strongest one moose, but its the one that gets hit the most also. After you get a lift, it will be much better. :wink:


The front is still OK, but the diff skid got knocked up into the diff. Made a noise so bad I thought I'd broken the diff! :shock: 15-20 hits with the hammer, and she was good for another run in the rock garden...
Author:  mvef [ Sun Aug 20, 2006 1:53 am ]
Post subject: 
Is it going to fit in a 02 Liberty?
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/