LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

electric brake controller
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=1&t=11922		 Page 1 of 1
Author:  adamkrz [ Wed Aug 30, 2006 8:33 pm ]
Post subject:  electric brake controller
For the power supply, Should I buy a circuit breaker (20 amp) or are there provisions already there for for this? I have not bought a controller yet but plan on buying a Tekonsha prodogy and it requires a circuit breaker or fuse for the power supply.My 04 sport is did not come with a tow package..Thanks.
Author:  Amarony [ Thu Aug 31, 2006 3:49 am ]
Post subject: 
Yes you need to buy the circuit breaker. I put mine up by the battery.
Author:  Cowcatcher [ Thu Aug 31, 2006 1:46 pm ]
Post subject: 
On my CRD I put it on the mounting screw for a wiring bundle on the drivers side firewall up under the windshield. Well protected and saved drilling holes.
Author:  Edwin [ Tue Sep 05, 2006 12:39 am ]
Post subject:  Re: electric brake controller
adamkrz wrote:
For the power supply, Should I buy a circuit breaker (20 amp) or are there provisions already there for for this? I have not bought a controller yet but plan on buying a Tekonsha prodogy and it requires a circuit breaker or fuse for the power supply.My 04 sport is did not come with a tow package..Thanks.



Very goot brake controller, that's what I'm usin.
Author:  tskalil [ Tue Sep 05, 2006 1:14 pm ]
Post subject:  Brake controller wiring
When I've had brake controllers professionally installed they've used separate 40 amp circuit breakers on the battery line. Never had a problem with them and I've also since made several similar installations myself. All were for big trailers. Your total current drain might be less, but I know these work. Also, when a fuse goes, you'll need to replace it before your brakes will work
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/